vtec on my B16
07-22-2006, 01:48 PM
#1
3.0 BAR
Thread Starter
Join Date: Aug 2003
Posts: 1,950
vtec on my B16
Ok so I have a chipped P06 with vtec but I have yet to hook up my 02 sensor so it's throwing an 02 code. I ran the vtec solenoid wire to the ecu and now I have a rev limit of 6500 and no vtec, is this because of the o2 code?? Once I fix that will I be all set?
Going to toss an 02 in now.
07-22-2006, 05:24 PM
#4
3.0 BAR
Thread Starter
Join Date: Aug 2003
Posts: 1,950
Re: vtec on my B16
No codes, hooked up an 02, no vtec, rev limit still at 6500. This is a vtec p06 done by a guy who knows what he's doing. Is something wrong in uberdata? That's all I can think of. If the ecu is good, and there aren't any codes... I don't need vtec coolant check or any of that right? I just have ELD, PA sensor, and vtec the only things that are checked...
07-22-2006, 06:46 PM
#8
Guest
Posts: n/a
Re: vtec on my B16
Originally Posted by nonvtec
Yeah but I thought in uberdata you only needed to wire the single wire for vtec solenoid since the p06 isn't looking for vtec oil pressure.
