Vtec controller & pm6
 

ll the controllers i have looked at say hook a wire to the vtec out put of the ecu..since the pm6 does not have vtec can i still use a vtec contoller? and my curent set up isa d16z6 in a 88 crx si W/ a Pm6 runnig turboedit with the summit rpm swich would geting a vtec contolller help. i think the only reason i want i is becouse i can adjust it on the fly (NO dip SWichs) is this worth the hassles??
thanks TweakedCrx
ps the vtec contoller is the cheap 1 of ebay
http://cgi.ebay.com/ebaymotors...&rd=1

Re:Vtec controller & pm6
 

__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:Vtec controller & pm6
 

i not looking for hp i looking for function
if the controller need vtec "INPUT" were do i get it from?

Re:Vtec controller & pm6
 

It's just a 12v+ signal. You connect the output from the controller to your VTEC solenoid.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:Vtec controller & pm6
 

ok u dont under stand
the contorller need a input from the ecu

Re:Vtec controller & pm6
 

Well find me a working link to this controller or at least tell me what the ---- it is. I suck at mind reading.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:Vtec controller & pm6
 

all of the vtec contoller apex/feilds/data systems /even the the cheap 1s from ebay use a the out from the stock ecu then change in the contorller since thepm6 does not have vtec where do i hook the wire fromthe controller that is labeled vtec sigal from ecu??

http://www.newbieforces.com/files/vtectweaked.gif

Re:Vtec controller & pm6
 

You don't do anything with it since your vehicel didn't come with it.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:Vtec controller & pm6
 

ok thanks thats what i need to know