Vtec with Bre
I have a 89 civic Si with a b16 currently running on a Pwo ecu. I made a subharness and pinned vtec, knock sensor, and o2 in to the ecu. I have a socketed PM6 that I want to start using, I was just wondering how Vtec is used through the PM6 with Bre. Do I keep the wiring that I pinned into the ecu or do I remove and run the vtec differently with the PM6?
|
Re: Vtec with Bre
its call one wire vtec. u can activate vtec by a A/C switch.it would be a better to use a ps9 ecu.
|
Re: Vtec with Bre
If you want to use BRE, chip the PW0 and run the car on that...if you CAN run VTEC the right way, you def should.
|
Re: Vtec with Bre
Originally Posted by xenocron
If you want to use BRE, chip the PW0 and run the car on that...if you CAN run VTEC the right way, you def should.
|
Re: Vtec with Bre
|
Re: Vtec with Bre
I would use the PW0..Been using BRE with a PWO on my turbo b16
been boosting 13psi\w a wideband for 4 months strong never had any problems.... But soon enough will go with OBD1 its way more tuneable |
Re: Vtec with Bre
not to mention if use a pm6 with a b16 u wont have high and low maps.it will run but like it would if it was a chipped pwo.
|
All times are GMT -5. The time now is 12:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands