VAFCII help
I want to raise the VTEC crossover on my b16 with the use of my VAFCII. When i did the swap i chipped a p28 but they set the vtec crossover to 4800rpm. In my opinion that is way too low.
Now, since the ecu is chipped and i am raising the vtec crossover [V/T Cont] via the VAFC do i need to set the fuel correction at VTEC unmatch [V/T Unmt] to anything. I figured if anything it would probably be a (-) number b/c the ecu would think vtec has crossed over at 4800rpm, while really i would change it to 5200-5500rpm, so it would be sending enough fuel vtec but really it wouldn't have crossed over yet. If i left the [V/T Unmt] at 0% would i be running too rich and be hurting performance more than just having the ecu crossover vtec at 4800rpm? I know its kinda stupid to have a chipped ecu and a vafc but it was a present, so i figured i could use it to lower vtec x-over. |
All times are GMT -5. The time now is 09:46 AM. |
© 2024 MH Sub I, LLC dba Internet Brands