vafc dosent initialize settings
 

I need some help from poeple who use the hack. I have everything hooked up . It turns on and everything but when i shut my car off and turn it back on and double check to see if my setting are still there , they are not. I dont know if i am doing something wrong or if there is a trick to it. Help me out please i dont want to run the fmu and my car is running like crap . Thanks in advance ???

Re:vafc dosent initialize settings
 

did you get it used? There is a setting on the vafcII to password protect the parameters so nobody can change them. I don't know if this would cause your problem, but you might look into it if it applies to you.

Re:vafc dosent initialize settings
 

Are you 100% sure it is hooked up right? Sounds like you have the power wire hooked up wrong?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:vafc dosent initialize settings
 

I went by the intructions and pinout on the diagrams. I bought the thing from someone else but it was still in the box and it was never hooked up. It is not the vafc ll . Just the regular one. Would it make a difference
if i hook it up (powerwise) another way other than by using the ecu power wire. Thanks again ???

Re:vafc dosent initialize settings
 

are you going to "initialize" in the etc. menu? if you are then don't because that erases the settings. i set mine up twice before i realized that initialize means erase. go figure ::)

Re:vafc dosent initialize settings
 

Thats what i found out a earlier and now i am not pushing the initialize button. Thanks to the poeple who replied. She also running nice at idle. Thanks HMT!!! ;D

Re:vafc dosent initialize settings
 

Ha ha..... ;D...... initialize= default setting which erases the operators set-point.....

Re:vafc dosent initialize settings
 

i had the same problem hahaha
but that was a long time ago...

i had my VAFC unplugged for few months. when i plugged it in to another car the settings where still there 8)