HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   v-afc question (https://www.homemadeturbo.com/engine-management-10/v-afc-question-64413/)

MAJORAHOLE 07-07-2006 12:50 PM

v-afc question
 
it may sound dumb, but if you decrease your fuel with a v-afc you will advance the timing. so is it safe to assume that if you add fuel it will retard timing??
i chipped my ecu and i never took out the v-afc, i was just wondering if i added fuel with that would it advance timing.
thanks

douspray 07-07-2006 03:12 PM

Re: v-afc question
 
if ur ecu is chipped why in the hell would u use the hack to scale your injectors still? mine is still in my car, but i only use it ---- with the vtec crossover point, but projekteg told me that as long as you don't go over +10 or -10 it shouldn't affect the timing.

MAJORAHOLE 07-07-2006 03:46 PM

Re: v-afc question
 
i didn't say i was using it to scale my injectors. thanks :-*

douspray 07-07-2006 07:16 PM

Re: v-afc question
 
adding or subrtacting fuel is scaling the injectors. O0

MAJORAHOLE 07-13-2006 12:29 PM

Re: v-afc question
 
i thought scaling the injectors is what crome does in the fuel table thang, sorry. i just wanted to know cause i left my v-afc installed and it was still was doing a small amount of fuel correction, but adding fuel not removing

idiot-stick 07-13-2006 01:02 PM

Re: v-afc question
 
it's easier if you dont think of it as "adding fuel" but "sending a higher voltage MAP signal to the ECU" :6


All times are GMT -5. The time now is 10:29 AM.


© 2024 MH Sub I, LLC dba Internet Brands