v-afc on a d16a6 non-vtec
 

----!!!! i've been looking for how to wire up all this ---- since like noon and can't figure it out. I know i don't hook the vtec and vtm up. I have seen how to use a voltmeter... but the car isn't working, so i can't really get a signal I was sent to diffrent forums and websites, but i can't find out the right color code and number that matched (i.e. they say a15 (yellow/black) but it is not yellow black it's green/black. SO... has anybody put one of these on a non-vtec a6 ecu or know how to do it or have a link??? thanks

dan

Re:v-afc on a d16a6 non-vtec
 

Hve you tried www.apexi.com ?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:v-afc on a d16a6 non-vtec
 

yeah... they give you directions to install on vtec vehicals and recamend not to install on non-vtec ones.... so i basically get no help from them. Also i read the s-afc thing and it isn't really helping... but i will take another look at it. Thanks for posting

dan

Re:v-afc on a d16a6 non-vtec
 

VTec activation wire is pink. This is a 12v wire you run directly to the VTec solenoid. You do not use theVTec oil pressure sensor with a non-VTec ECU vehicle. This wire does not connect to the ECU.

Re:v-afc on a d16a6 non-vtec
 

Yes, i know that much, but what about which color wire the throttle signal, rpm signal, and pressure input/output signals connect with??

dan

Re:v-afc on a d16a6 non-vtec
 

No need to be snotty, remember, you're the one asking for help.

TPS is at C7, MAP sensor Voltage (Which is your manifold pressure) is at C15, I forget where RPM is.. check on google for ECU Pinouts.

Re:v-afc on a d16a6 non-vtec
 

sorry.... i really didn't mean to be snotty... really! I appreciate the answer.... exactly what i was looking for... i have the chiltins' manual for the car... they have the pinouts... but i cannot figure it out... i'm pretty sure it has to come off of the distributer pins... but i donno which one it is... if anybody knows what it is, i'm interested... and i will check google. thanks

dan

Re:v-afc on a d16a6 non-vtec
 

Just wanted anyone who saw this to know i found this: http://www.geocities.com/bing_bong916/vtec_cont3.html If you don't know what the pinouts are try a google search, they had a website in there that had some good diagrams!

dan

Re:v-afc on a d16a6 non-vtec