Upgrading To obd1
 

I grabbed a p06 at the pick and pull for nothing the other day, and have a line on an obd1 Ls dist for dirt cheap, and i'm half done building the conversion harness, so i decided i'd convert my Ef b18b to to OBD1 as next year i want to upgrade to bigger injectors and Turboedit doesn't support anything bigger than 450cc's. I've read around the faq, Pgmfi, and i'm fairly confident about what i need for tuning and such, i just got a chip kit and hulog. I've currently got a batronix programmer, this is capable of burning obd1 chips right? As for tuning and datalogging, can i use crome to tune, and freelog to datalog? Or should i just buy chrome pro? Also, ive got a hunderd 29c256 chips, can i just use these?

Re: Upgrading To obd1
 

well firstly turboedit can support any injectors you run,you will just have to scale the map for them. yes you batronix will still burn chips regardless of obd 1. i personally would use crome as thats what i am going to be using when i get my ass up and put my ---- on. freelog is good well because its free. if you feel the need to buy crome pro more power to you.and i personally prefer to use ss512 ships because they are cheaper

Re: Upgrading To obd1
 

so to scale the map. say i went with 660 inectors, and i've got the map for 450's now, i would just divide the new size by 450 and figure out the percentage, and then increase my map that percentage accross the entire map? Is this, correct or am i way off?