Help me plz I downloaded uberdata from http://www.ecimulti.org/uberdata/ and am having serious problems!! the version number is 1.61 and yes everyting i am bout to tell yall is veiwd while i have a .bin file opend


What works for me: (works as supposed to)
-----------------------------------------------------------
Fuel Lo
Fuel High
Ign Lo
Ign High

What works parciouly for me:
-----------------------------------------------------------
Boost (it only has 2 things under it, Boost fuel eff, Boost ign retard)
there is no option for diffnt size map sensors

What doesnt work for me:
-----------------------------------------------------------
rev limits has absolutely nothing under it
there are 0 options under this. no launch control or nething


misc has absolutely nothing under it
as above there are 0 options under this

 

you need to download the scripts and put it in the same folder as the exe file.

Also, he boost category never controlled the amount of boost...it was always based on the table and you just tune the table that effects your boost level. EX: if you are boosting 7 psi...you dont need to really worry about the 11.03 PSI column. Also if you want to boost over 11.03 psi you need a differnt map sensor, and if you have that then you need to change some of the scripting....gimpy civic might be able to help you out with that...i dont know how to script...

 

jbob already knows this as he learned this in another thread, right jbob?!

 

yes i understand all that yall 2 are saying BUT, there is supposed to be a option for choosing diffnt mapsensors, for setting launch control, and other stuff like that. mine has none of that. i found a old version 1.2 that has launch control and everything but doesnt allow the use of diffnt mapsensors plz help me get this fixed.

 

DUDE, you have to download the scripts and put them in the same dir as the exe (as bigwig said below). That is what enables the rev, and misc functions for controlling vtec and other options.

 

hey dude! i did that already.... but they are still not there... o well i dowloaded the old version 1.5 and everything on it happens to work so i am using that now

 

I think the FAQ needs to be updated! I'm taking a look at 1.6 and its a bit different from the 1.2 FAQ that I was reading on that Uberdata site.

Does anyone have a bin for the B16 with 7-8psi of boost using a T3 and 450cc DSM injectors? I know someone HAS TO HAVE THIS.

Thanks

 

I downloaded uberdata 1.62 but I get the error that asm662.dll could not be found when I try to run it . Can anyone tell me how to get this dll? The copy I got was zipped, but it wasn't an installer, should there be an installer that will install this file? If so, I'd love to see a link to it.

 

There is no installer... at least not to my knowledge. The file should have already been inside the zip file. What i did was just "extract" all of the files into a folder and that should work ok...

ASM662.dll is inside of the zip... if you are still having trouble i can always send you the zip I have no sweat...

 

yes, please - it isn't in the zip I downloaded. I've got uberteg v 1.2, but I'd like to see what 1.62 is like. email d16tuner@yahoo.com

Thanks