Uberdata and SAFC
I have a chipped ecu with uberdata, but i can't rev to more than 4k on neutral so i can't launch, and the car bogs before hits boost on first gear, when hits boost like at 2k the problem gone away. I think i have to much fuel in low rpms.
The question are if i can use SAFC to extract fuel at low rpms to make the car run smother. |
Re: Uberdata and SAFC
learn how to tune with uberdata. using an SAFC along with uberdata is like going backwards.
what ecu are you using? if you want email your .bin file that you are using and ill take a look at it |
Re: Uberdata and SAFC
Is your A/C switch on? Maybe FTL is enabled.
|
Re: Uberdata and SAFC
Ya Full throttle launch is enabled.
|
Re: Uberdata and SAFC
heres the rev limits from the bin
http://i64.photobucket.com/albums/h1.../revlimits.jpg |
Re: Uberdata and SAFC
so , are you using chipped ecu and safc together?
|
Re: Uberdata and SAFC
what ecu, engine, and injectors are you using? if you post your bin it will be a lot easier
|
Re: Uberdata and SAFC
1 Attachment(s)
stock d16z6
HF mani T3 AR.60 open downpipe dsm intercooler 450s homemade pipping stock fuel pump psi i know that bin are set to 11psi but first i need to buy a walbro to go up to 11 Heres the bin i use |
Re: Uberdata and SAFC
1 Attachment(s)
dude, that ---- is all screwed up. use this one and i bet it will run pretty nice
|
Re: Uberdata and SAFC
what version do you are using?
|
Re: Uberdata and SAFC
i dont know if you are asking me, but i am using the newest safe version, not the beta
|
Re: Uberdata and SAFC
1.7 i assume.. yep i can open your bin but not of his bin..
|
Re: Uberdata and SAFC
i could open his, but quite a bit of it looked bad
|
Re: Uberdata and SAFC
I cant download that bin, it downloads as text type :-[, can you attach the bin again?
And which problems have my bin? |
Re: Uberdata and SAFC
Originally Posted by hard2obtain
I cant download that bin, it downloads as text type :-[, can you attach the bin again?
And which problems have my bin? |
Re: Uberdata and SAFC
Originally Posted by PhilStubbs
i could open his, but quite a bit of it looked bad
|
Re: Uberdata and SAFC
Ok i dowload it.
This is the same bin good for 11psi? |
Re: Uberdata and SAFC
i wont garuntee cause this was made for my car and not yours, but it looks like it will be fine. i would recommend getting a real tune soon with a wideband. just use it as a basemap
|
Re: Uberdata and SAFC
Originally Posted by PhilStubbs
i wont garuntee cause this was made for my car and not yours, but it looks like it will be fine. i would recommend getting a real tune soon with a wideband. just use it as a basemap
And thank you very much |
Re: Uberdata and SAFC
Originally Posted by hard2obtain
ok im goig to use it to 10psi max
And thank you very much |
Re: Uberdata and SAFC
test it first off with a WB, look a/f guy.. cuz runing with 10 psi.... :l
|
Re: Uberdata and SAFC
Originally Posted by PhilStubbs
i wont garuntee cause this was made for my car and not yours, but it looks like it will be fine. i would recommend getting a real tune soon with a wideband. just use it as a basemap
Which are your current setup PhilStubbs and how many psi are you running, because i suppose this new bin are the bin you are using on your setup. ;D |
Re: Uberdata and SAFC
i am only running 5psi cause someone stole my sweet cca fmic
|
Re: Uberdata and SAFC
and for how many psi are good that basemap you post?
|
Re: Uberdata and SAFC
it was made for up to 11, and it has gone that high and ran fine a few times, but not on a regular basis
|
Re: Uberdata and SAFC
Ok, i tell to you later how it works in my setup ;D, and thank you again for save another SOHC
|
Re: Uberdata and SAFC
Gotta love the D!!!
|
Re: Uberdata and SAFC
Hey phil, i bought another chip from moates with your new bin, but the first time i start the car this barely idles for a few seconds then shut downs, later when i try to start again the car didn't start :'(, i try several times but not responds.
I change the chip again for the other that was a crap, and now at least i can use the car :-\. |
Re: Uberdata and SAFC
1 Attachment(s)
what size are you injectors? thats the same bin i am using on my car with a z6 and dsm 450's.
i made a few changes. maybe this will work for you |
Re: Uberdata and SAFC
well i think i need to buy a burner :l
|
Re: Uberdata and SAFC
how were you getting bin's onto chips before?
|
Re: Uberdata and SAFC
Originally Posted by PhilStubbs
how were you getting bin's onto chips before?
|
Re: Uberdata and SAFC
Originally Posted by PhilStubbs
how were you getting bin's onto chips before?
|
Re: Uberdata and SAFC
oh, now i feel kinda bad. i thought you had a burner.
|
Re: Uberdata and SAFC
i recommend to you to burn yourself ur chips... or to use a chips bunerd with good maps but made by reliable guys like xenocron..his chips work good!.
|
Re: Uberdata and SAFC
yea, i never would have given you a bin of mine to use if i knew you had to spend money to use it. if you want to send me that chip i will put my 2nd try on it and ill pay to ship it back to you. as long as the chip is electronicly erasable. what chip is it?
|
Re: Uberdata and SAFC
The chips are 27sf512 model c2, and they they are erasable, but don't worry, im going to save to buy a chip burner, maybe a Moates BURN1 USB Chip Programmer, what you think about this one?
|
Re: Uberdata and SAFC
i dont know anything about chip burners really. the only one i have used is my old willem burner. it works great, but you have to learn all of the little quirks about it
|
Re: Uberdata and SAFC
Moates burner1 FTW!
|
All times are GMT -5. The time now is 02:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands