uberdata question
04-23-2005, 07:37 PM
#1
1.5 BAR
Thread Starter
Join Date: Aug 2004
Posts: 710
uberdata question
so i found a shop near my house to socket my ecu. i asked them if i could give them a program to burn onto the chip, and they said ya. now i know that you can change settings in the ROM editor...right? because i am going to be using 390's instead of 450's and I want to change the program to those setting. will the rom editor let me do all this? i tried looking for the program but i cant find it. i have saved a couple of files from ubderdata - like the StockLS.bin - now should i just tell the guy to burn that file onto the chip
or do i need to edit the file before i burn it on there?? thanks
or do i need to edit the file before i burn it on there?? thanks
04-23-2005, 11:07 PM
#2
3.0 BAR
Join Date: Mar 2003
Posts: 5,282
Re: uberdata question
He's going to need to edit the file before he burns it to the chip.. But, he should be educated before attempting to just do this to a customers car. technically if he can tune/work with Hondata, he should be able to learn and use Uberdata. the principles and table measurements are the same. Just be sure you explain your setup and what you need changed and make sure they understand that. Why not have Projekteg or Xenocron work magic on your ecu?
04-24-2005, 01:07 PM
#3
1.5 BAR
Thread Starter
Join Date: Aug 2004
Posts: 710
Re: uberdata question
becuase i dont have to pay shipping to them, and this way i know who i am sending it to. its only about 20mins away from my house, and they said they could do it in an hour. so....but thanks.
on more question....the data logging cable....can i get that at a computer store? if so what is it called? can i use any old 9pin connector is there a write up where you solder the data logging cable? thanks
on more question....the data logging cable....can i get that at a computer store? if so what is it called? can i use any old 9pin connector
is there a write up where you solder the data logging cable? thanks
04-24-2005, 01:12 PM
#4
1.5 BAR
Thread Starter
Join Date: Aug 2004
Posts: 710
Re: uberdata question
does he need to edit the StockLS.bin file?
?
04-24-2005, 01:20 PM
#5
Guest
Posts: n/a
Re: uberdata question
Originally Posted by DeleriouS
does he need to edit the StockLS.bin file?
?
04-24-2005, 04:16 PM
#6
1.5 BAR
Thread Starter
Join Date: Aug 2004
Posts: 710
Re: uberdata question
what program do i use to edit it myself?
04-24-2005, 04:20 PM
#7
0.0 BAR
Join Date: Mar 2004
Posts: 0
Re: uberdata question
You or the guy who is chipping your ECU are really going to ---- up your car. You have no idea what you are doing. You should have Kevin or Chris do it and give you basemap then you need to find someone that can tune Uberdata. Other than that you should just drain the oil and fire it up and go for a drive. That will save future headache.
04-24-2005, 08:53 PM
#8
1.5 BAR
Thread Starter
Join Date: Aug 2004
Posts: 710
Re: uberdata question
see my project car is my daily driver, i cant wait 3 days to get my ecu back. i would rather drive a half an hour away and wait an hour until its finished.
04-24-2005, 09:20 PM
#9
Guest
Posts: n/a
Re: uberdata question
Damn I wish I could just reach through my computer and choke the ---- out of you
04-24-2005, 11:42 PM
#10
0.0 BAR
Join Date: Jan 2004
Posts: 0
Re: uberdata question
Originally Posted by DeleriouS
see my project car is my daily driver, i cant wait 3 days to get my ecu back. i would rather drive a half an hour away and wait an hour until its finished.
punch yourself in the ------- face, because i can guarantee that your car is gonna be fucked
