Uberdata question
 

what do i need to buy to get the info from my compy to download onto my p72 ecu? any links? thanks...please dont flame.

Re:Uberdata question
 

Do you have a burner and your ecu chipped? If not I would recomend going on Moates.net and getting their stuff.

They have a program that burns the chips and you just put the chip in the ecu.

Re:Uberdata question
 

i dont know if i have a burner and i havnt chipped my ecu yet but i still dont get how you get the info from my computer onto the ecu?!?!

Re:Uberdata question
 

You have much to learn grasshopper! You need a rom editor, then a chipped ECU and a Eprom burner.

Re:Uberdata question
 

Download Uberdata...play.

Chip your ECU or get it chipped.

Buy a Burner.

Make a .BIN file with Uberdata.

Burn the .BIN file onto a chip using your newly acquired burner.

Put the chip in your 'chipped' ECU.

Plug the ECU in your car and start her up.

Put the car in gear and drive.

:-*

Re:Uberdata question
 

Re:Uberdata question
 

Wha... ::scratches head::

Something you didnt understand?

Ask a good question or this post gets closed.

Re:Uberdata question
 

i dont get those two.

Re:Uberdata question
 

then you obviously have no clue and have a lot to learn before you start to chip your ecu and burn a chip.

Re:Uberdata question
 

hense me asking now...what is the big deal. maybe i do know what i am doing i just dont understand those words. i am a lot smarter then you think i am. just tell me those two things please and i will be on my way. dont you learn by asking questions? i have already looked and it doesnt say on the website. so ???

Re:Uberdata question
 

Think of a chip burner like a CD burner. Think of the chip as a CD-R.

Think of Uberdata as Microsoft Word, and think of the .BIN file as a Word Document.

Make the .BIN file with Uberdata (Create a Word Document with Word)

Burn the .BIN file on a chip with chip burner (Burn the Word Document on a blank CD with a CD burner)

If you dont get that...no one can help you :'(

Re:Uberdata question
 

please research! you are looking really stupid right meow!

BURNER: device needed/use to program the chip/install rom editor to.
PUT CHIP INTO ECU: after you researched/ask proper questions/read the engine management section/or go to www.ecimulti.org/uberdata, and learn about what you need to chip your ecu, go to www.moates.net and order a BURN1 burner, and order uberdata chipping supplies... research a lot, you NEED IT.

Re:Uberdata question
 

i wasn't trying to sound like a dick (i just realized i kind of did), but this is very basic stuff, the first things you need to know, it's kind of like saying i want a turbo'd car, but don't know what a turbo is. you have to modify (socket) your ecu to accept the external 28 pin eprom chips. once you have done that, you need a chip burner to burn (program) the 'tune/program/.bin/ whatever you want to call it' that you created in uberdata/turbo edit/etc., once you have the chip programmed, you place it in the ecu.

Re:Uberdata question
 

i get how to do everything. i just dont know how you get the data from the .bin files onto the chip...thats it!i know you cant just put it next to the computer screen and it zaps right onto the chip. i am sure that you have to have some kind of connection to the chip to get that information onto the chip. how do i do that.

Re:Uberdata question
 

you load it in to the chip burner software, the chip burner then loads the binary data on to the chip.

Re:Uberdata question
 

you are still losing me here. is there a cable from my computer to the chip????? how do i get the data from my computer to my chip? i dont get it

Re:Uberdata question
 

Okay man seriously... listen, and comprehend.

Buy a chip burner. You need one. But a Batronix, a Moates, or a Willem, doesn't matter. Personal preference. there are lots of writeups on which one people prefer and which one works for them. Do a search on it. then depending on which burner you bought, it will probably come with software to operate said burner. after creating a *.bin file in Uberdata, you can open this same file in the chip burner software, insert a blank chip into the chip burner, and have the burner software write the .bin file to the chip.

i'm out

Re:Uberdata question
 

Oh yeah, and to learn how to chip your ecu, go here:

http://www.pgmfi.org/twiki/bin/view/Library/WebHome

read read read, till you're sick of reading, and then read some more. You'll get it.