uberdata q
Thread Starter
0.5 BAR
Joined: Jun 2006
Posts: 109
uberdata q
when i open up pats bin.a message pops up saying 'failed to assemle "L1H1_AF.asm", this can potentially cause ecu failure'. n after that a notepad named asm.log opens up with this in it
Assembling: L1H1_AF.asm
Assembling: L1H1_AF.asm
Assembling: tpsfuel.asm
Assembling: coldfuel.asm
Assembling: mainfuel.asm
Assembling: datalogger.asm
Assembling: iacv_adjust.asm
Assembling: fuelwordlookup.asm
Assembling: L1H1_AF.asm
Assembling: ftl.asm
Assembling: L1H1_AF.asm
Assembling: L1H1_AF.asm
now wtf is this stuff?
Assembling: L1H1_AF.asm
Assembling: L1H1_AF.asm
Assembling: tpsfuel.asm
Assembling: coldfuel.asm
Assembling: mainfuel.asm
Assembling: datalogger.asm
Assembling: iacv_adjust.asm
Assembling: fuelwordlookup.asm
Assembling: L1H1_AF.asm
Assembling: ftl.asm
Assembling: L1H1_AF.asm
Assembling: L1H1_AF.asm
now wtf is this stuff?
Guest
Posts: n/a
Re: uberdata q
L1H1_AF.asm Just a little hint, If you open that file in the uberdata folder you'll see the wideband voltage/ air fuel tables. Then you will know exacty what to set your slope on the lc-1 or lm-1 so your readings will match for datalogging. 
Guest
Posts: n/a
Re: uberdata q
U ppl
?What do you meen by that YOU PEOPLE?? I,m offended. Try to pe a poor white boy trying to help somebody out and they gotta be racist and put me in a stereotype.
You people. You make me sick.
Um just look around.When you have uberdata open. all the things you asked about should be in the misc tab.
?What do you meen by that YOU PEOPLE?? I,m offended. Try to pe a poor white boy trying to help somebody out and they gotta be racist and put me in a stereotype.You people. You make me sick.
Um just look around.When you have uberdata open. all the things you asked about should be in the misc tab.
Thread Starter
0.5 BAR
Joined: Jun 2006
Posts: 109
Re: uberdata q
lol no man its nothing like that. what i meant by sayin u people was that 'u experienced people'. im just a nood and just got into tuning and using uberdata, crome. wanted to ask u because uve used this stuff. so ya i know where they are .but What is boostcut cut? like what does it do. and what is rpm shift cut?
Thread Starter
0.5 BAR
Joined: Jun 2006
Posts: 109
Re: uberdata q
ye i understand what it is. but like what are the numbers beside it. like the bin i got from xeno has these values: 4975 for boostcut cut and 4809 for boost cut resume. so what are these numbers? and tell me about RPM SHIFT CUT
