Engine Management eCtune , Crome , AFC , FMU , Zdyne , Hondata , EMS , TE , Uberdata Anything to control your fuel, spark needs!

turboedit + 450ccs but no turbo yet....

Old 08-31-2004, 10:00 AM
  #1  
1.5 BAR
Thread Starter
 
Join Date: Jul 2004
Posts: 1,437
Default turboedit + 450ccs but no turbo yet....

If I were to install my 450ccs and then setup the stock pg6 map and caclulate it for the 450ccs dsm injecotrs, would i get the same gas mileage as i did before if im running w/o a turbo? like if i were to tune it down to run basicly just like the stock ecu/injecotrs?

and will this cause any probs with flooding anything like that on engine start up?

ssl2k is offline  
Old 08-31-2004, 10:55 AM
  #2  
3.0 BAR
 
Join Date: May 2003
Posts: 5,381
Default Re:turboedit + 450ccs but no turbo yet....

thats a good question...i would think that you would be better off with stocks for now. i dont see why you would need the 450's right now..but again im not sure if the ECU would scale them down ...
juli0_bustamante is offline  
Old 08-31-2004, 11:31 AM
  #3  
1.5 BAR
Thread Starter
 
Join Date: Jul 2004
Posts: 1,437
Default Re:turboedit + 450ccs but no turbo yet....

i know it can scale it down...

but anyways, i have my intake manifold off and i wanna swap the injecotrs while it's off

nathan
ssl2k is offline  
Old 08-31-2004, 12:48 PM
  #4  
3.0 BAR
 
Join Date: May 2003
Posts: 5,381
Default Re:turboedit + 450ccs but no turbo yet....

dude, you can swap injectors with the manifold on aswell...
juli0_bustamante is offline  
Old 08-31-2004, 02:11 PM
  #5  
0.5 BAR
 
Join Date: Aug 2004
Posts: 67
Default Re:turboedit + 450ccs but no turbo yet....

I guess I don't see why Turboedit wouldn't work for you. Try it and if it doesn't work, well, post it up and let us know, swaping injectors doesn't take that long in the car.
MNCRXSi is offline  
Old 08-31-2004, 03:21 PM
  #6  
1.5 BAR
 
Join Date: Sep 2003
Posts: 708
Default Re:turboedit + 450ccs but no turbo yet....

as long as you use a stock map, and use the basemap helper, your mileage should not change significantly.

the only changes made when scaling from 240's to 450's is the time the injectors are open, so it will work, yes.
warric_k is offline  
Old 08-31-2004, 04:09 PM
  #7  
1.5 BAR
Thread Starter
 
Join Date: Jul 2004
Posts: 1,437
Default Re:turboedit + 450ccs but no turbo yet....

Originally Posted by warrick
as long as you use a stock map, and use the basemap helper, your mileage should not change significantly.

the only changes made when scaling from 240's to 450's is the time the injectors are open, so it will work, yes.

this was exactly what i was lookin for

and yeah i know you can swap them with the itnake manifold is off,but i have it out and might as well do it right now while it is out

nathan
ssl2k is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
5thgencivickid
Turbo Parts For Sale
0
03-29-2005 09:16 AM
5thgencivickid
Engine Management
10
03-21-2005 05:17 PM
5thgencivickid
Wanted
2
02-12-2005 03:53 PM
accordtunerx
Engine Management
4
01-07-2004 12:40 PM
smokey_civic
Turbo Parts For Sale
21
11-16-2003 06:26 PM


Thread Tools
Search this Thread
Quick Reply: turboedit + 450ccs but no turbo yet....


Contact Us - Sitemap - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.