turbo edit for all motor?
 

i'm wanting to make a te .bin for an na b16 using a vtec controller for vtec. can i paste the stock pr4 rom in ng28 so that i can utilize the 'properities' features. or should i just burn the stock pr3 or pr4 rom?

Re:turbo edit for all motor?
 

anyone? i would like to know this too.

Re:turbo edit for all motor?
 

when i try to make a map for 240cc injectors, it says 'unable to scale to smaller injector size' ???

Re:turbo edit for all motor?
 

hold on, let me look on my computer. I have the pm6 code with pr3 maps.

Ok, I lied. I don't have it any more. Just make your own. Open the stock PR3 rom, open the ng48 rom and just copy the low ign/fuel maps up until where you would like your vtec point, and then the high ign/fuel maps above that point.

Hit me up if you need more help.

Voila.

-Nick

Re:turbo edit for all motor?
 

edit, damn, it's early :P i already tried that, my main problem was that i can't scale down the injectors to 240cc ??? :P

Re:turbo edit for all motor?
 

I'll whip up a basemap later this afternoon when I get home for you.

-Nick

Re:turbo edit for all motor?
 

that's cool, but i would still like to know how to scale down the injector size :-\

Re:turbo edit for all motor?
 

use xenocron's basemap helper.

you can't scale down injector sizes in TE, but you can make a new basemap/copy the values from stock maps.

if you copy the values from a stock map, it will be for 240cc injectors, even if the option still shows 450cc or whatever. what you see is strictly for 240cc.

to summarize, if you copy a map from a stock map, you can ignore the 450cc injector setting.

also, blundar or rory posted an ng48 rom with 240cc injectors somewhere in the ng48 thread.

Re:turbo edit for all motor?
 

Open the a stock rom, export the maps, import them into ng48 and bam, you have stock maps with 240cc injectors. The setting will even be on 240 if you take a look. Then you can do as you wish with the maps.

Re:turbo edit for all motor?
 

but ng48 doesn't support the pr3 rom, so it only imports 1 fuel map and 1 ign. map. so should i do that, then just copy and paste the high portions of the maps from the stock rom in to ng48 after the given rpm where vtec is set to engage? sorry, i'm trying to help a friend and i'm by far no obd0 guru :P