HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Engine Management (https://www.homemadeturbo.com/engine-management-10/)

- - Tuning smc (https://www.homemadeturbo.com/engine-management-10/tuning-smc-6337/)

BlinD

06-18-2003 06:47 PM

Tuning smc

Ok too much fuel = detonation. And too little = detonation. Wheres a good setting to start at before a street tune? And on the a/f meter when will I know when I'm not running too rich or too lean. I need to figure out what i should start my settings at. I read the settings post, and it seems -35 is the common. Just need some opinions. Thanks.

d16y7 w/ 14b walbro 255lph pump dsm 450cc smc500

turboboy

06-19-2003 03:30 AM

Re:Tuning smc

put the idle at 35, then i went from 40 to 37 through the rpm range...but 35 is a good start

BlinD

06-19-2003 07:01 AM

Re:Tuning smc

On my a/f gauge when tuning. Do I wanna stay around stock (2 bars in rich) or do I wanna stay towards the rich side of stoich?

turboboy

06-19-2003 01:03 PM

Re:Tuning smc

always good to stay rich, but more fuel=slower but safer

All times are GMT -5. The time now is 05:03 PM.