Tuner look inside
 

anyone who can street tune dyno tune crome or ectune please let me know i need a tune on my car ... im from mass willing to drive to CT or NH ect... i have try contact Tranceminister - Steve Moulton but he hasnt reply from me so please help me out

Re: Tuner look inside
 

whats your setup? i might have a good basemap for you

Re: Tuner look inside
 

b18b1 ls
GSR tranny
arias 81.5mm piston eagle rod
31x12x3 FMIC
3 inch down pipe
3 inch intercooler piping on TB side and 2.5 to 3inch on turbo side
spa top mount manifold
1 step colder plug
stock igntion set up
holset he1 turbo as big as Hx40
tial 38mm gate 8 psi
650c precision injector obd1
adjustable fuel regulator 45 psi
walbro 255lph Hp
stock map sensor

PR4 ECU LS
feature i want on my ecu
no speed limiter
rev limiter 7500 rpm
boost cut at 10 psi
idle at 750 rpm

Re: Tuner look inside
 

the car run like ---- it keep on getting cut off like it runing too rich and blow out the spark this happen only when it fully warm up to operation temp in wot full boost but when the engine is still cold it run fine and pull hard any ideal what is going on ?

Re: Tuner look inside
 

Come down to NJ!

Dent Sport (speak to Matt) is in Massachusetts as well...

Re: Tuner look inside
 

i want my car to be tune by you chirs but u told me you wont be free untill couple week later will dent sport tune honda and ectune ?