timing
 

i just switched my car to ob0-obd1 and thru the turbo on the stock d15b1.. i used an edelbrock intake manifold as well. well im using the same chip that was on my built z6 just to try get it running but it runs like ---- i turned the dizzy back and forth doesnt seem to help much.. is the firing order for the spark plug wires the same on a d15b1 motor as a z6 motor? should i make a basemap for this motor.. the car idles fine a litle chopy but its open downpipe.. and wen i rev in nuetral it sounds ok its just wen its in gear it starts being all choppy and sounds like ignition is breaking up and it goes real slow. any suggestions or help would b appreciated

Re: timing
 

what injectors

Re: timing
 

You need to gap down your spark plugs to around .28

firing order is the same as your z6

Re: timing
 

440 rc injectors.. should i make another map and regap my spark plugs, set my dizzy in the middle.. and try go from there?

Re: timing
 

what map are you running?

set gap on plugs

retard timing, but that should be done automatically through your map

Re: timing
 

set your timming wiht a light.. 16btc 750rpm warm engine..