TE throwing code 8 TDC , help please.
Hi.
Iam in need of help on setting a turbo edit basemap, i have follow everything on this site http://www.-------------/te.php?page=basemap and thats where i bought my chipped pm6 aswell. The problem i have is when i finish setting up the map and burned it with William burner it will throw a code 8 "TDC" i erase and burn about 5 times, with no hopes, so i burned the stock PM6 map and it work just as normal as a stock pm6 would. I reset the ecu everytime i reburn the map buy taking out the hazard fuse and positive battery. I have read https://www.homemadeturbo.com/forum/...threadid=35497 and it works great, it fully write the chip and verified it. Help please... If anyone can make me a simple basemap for my setup like xenocron setup so i can see if its still does that and if im doing something wrong. I tried with NG60 ,NG55 with pm6 and pr4 , turbo edit 2.6 thank you. Car: crx si ls turbo. |
Re: TE throwing code 8 TDC , help please.
hop on xenocrons bin depository and find a close base map and see if that would work, also try diff. software like flash/burn or something.
|
Re: TE throwing code 8 TDC , help please.
ok i wil try tomorrow morning, thanks.
|
Re: TE throwing code 8 TDC , help please.
i have tried couples of basemap made from other on xencron site, still the same problem.
What other software is out there that i can download for free beside the one that come with william burner. thanks. |
Re: TE throwing code 8 TDC , help please.
A code 8 is not a problem with the chip...its a problem with the distributor or the wiring to the distributor.
|
Re: TE throwing code 8 TDC , help please.
Originally Posted by xenocron
A code 8 is not a problem with the chip...its a problem with the distributor or the wiring to the distributor.
|
Re: TE throwing code 8 TDC , help please.
so why isnt it throwing the code when i use the stock map?
thank you for responding. |
All times are GMT -5. The time now is 07:13 PM. |
© 2024 MH Sub I, LLC dba Internet Brands