t3 on a std t25 motor
hi
im building a 2.0 xm 8v turbo motor on my 205 gti .. it has std 160 hp i think the turbo on it is standard a garrett25 what do you have to do and replace so you can get a bigger turbo (t3) on it? injectors etc? please give me some advice .. sorry for my bad englisch i`m dutch .. greeetzzz |
Re: t3 on a std t25 motor
if its a factory turbo car, you should be able to do an upgrade like a .42/.48 or even a little bigger t3 on the stock fuel system and boost a few more psi than stock as well on the stock fuel system, but you will need a new manifold that will bolt up to the new turbo and your motor....
|
Re: t3 on a std t25 motor
oke i thought i would need a new exhaust manifold..
but do i need to increase the fuel when mounting a bigger turbo ? any hints/tips are welcome! greetzzz |
Re: t3 on a std t25 motor
You will need a new manifold, the t3 and the t25 have differant exhaust flanges, Put "attn of Dutchpug" in the title of your thread, he will definatly give you a answer, Hes the shyt with pugeot engines and turboing them!
|
Re: t3 on a std t25 motor
Not to mention he's Dutch, all you'll need is an exhaust manifold. Maybe you could get an SAFC to turn up the fuel a little bit to compensate for the bigger turbo.
|
Re: t3 on a std t25 motor
Yeah I know DutchPug personally...he's starting a business with another friend...Hit him up..he'll have what you need or you may do yourr own fabrication..
|
All times are GMT -5. The time now is 06:07 PM. |
© 2024 MH Sub I, LLC dba Internet Brands