HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   soon to dyno turbo b16 (https://www.homemadeturbo.com/engine-management-10/soon-dyno-turbo-b16-95611/)

whatupdohc 09-23-2008 05:03 AM

soon to dyno turbo b16
 
i am interesed in what the limiting factors will be on my turbo b16 ef hatch

1g b16 with ys1
stage 4 comp clutch
440cc inj
255lph fuel pump
57 trim turbo china style
8x30 intercooler
2.5" dp
2.25" down pipe to tip
before i have it dynoed what do u think i should upgrade is 275whp out of reach on this setup thanks for the info

lilpooh21186 09-23-2008 11:36 AM

Re: soon to dyno turbo b16
 
injectors chingchong turbo will prolly start leaking oil and ruin your tuning day.

Hitchhikkr 09-23-2008 12:08 PM

Re: soon to dyno turbo b16
 

Originally Posted by lilpooh21186
injectors chingchong turbo will prolly start leaking oil and ruin your tuning day.

+1

It wouldnt hurt to have a bit bigger exhaust if you can swing it.

-SKUM- 09-23-2008 12:52 PM

Re: soon to dyno turbo b16
 

Originally Posted by Hitchhikkr
+1

It wouldnt hurt to have a bit bigger exhaust if you can swing it.

or a cutout

txdohczc 09-23-2008 06:55 PM

Re: soon to dyno turbo b16
 
yeah like that one dudes boost actuated cut out.

whatupdohc 09-24-2008 04:42 AM

Re: soon to dyno turbo b16
 
yha i will just buy anothere ching chong as u say the a ------ cheap but i know its for a reson but i wanted to do a cut out what would happen if i tuned it open dp then hooked the exhaust back up but thanks for the tips if you think of any more let me know

supernewb 09-29-2008 02:43 AM

Re: soon to dyno turbo b16
 

Originally Posted by whatupdohc
yha i will just buy anothere ching chong as u say the a ------ cheap but i know its for a reson but i wanted to do a cut out what would happen if i tuned it open dp then hooked the exhaust back up but thanks for the tips if you think of any more let me know

then i would just run ritcher than with the cutout open (the ammount it would ritchen up would depend upon how restrictive the exhaust is from the closed cut out to the tip


All times are GMT -5. The time now is 02:54 PM.


© 2024 MH Sub I, LLC dba Internet Brands