HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   soild cel after i burn my chip, can someone help me (https://www.homemadeturbo.com/engine-management-10/soild-cel-after-i-burn-my-chip-can-someone-help-me-57887/)

z6efboosted 03-17-2006 02:02 PM
soild cel after i burn my chip, can someone help me
 
i cant figure out what im doing wrong. i dont know if im setting the chip up wrong or if im burning it wrong?????????? thanks

Minor Threat 03-17-2006 02:14 PM
Re: soild cel after i burn my chip, can someone help me
 
Solid CEL probably means your ECU is fucked, but have you jumped it yet? Try a known good chip and report back.

SpankedYA! 03-17-2006 03:01 PM
Re: soild cel after i burn my chip, can someone help me
 
Need more info. What type of chip,which burner, which program, size of your girls bra, etc.....

tranceminister 03-17-2006 08:08 PM
Re: soild cel after i burn my chip, can someone help me
 
Originally Posted by CSaddict
Need more info. What type of chip,which burner, which program, size of your girls bra, etc.....
All very important info :y CSaddict is right though, we need some more info on the specifics before we can get a general idea of what the problem could be.

z6efboosted 03-17-2006 08:59 PM
Re: soild cel after i burn my chip, can someone help me
 
the ecu is good because i have a good chip i use and a another for testing ---- or at least i try too. the chip im using is an sst27sf512, and the willem programmer burner or what ever its called. i found a write up on how to write a basemap and i go through all the steps and do as they say, and i save it. ill open up the burning program, which is 97ja, go to load, and find my bin and it says binary file loaded ok. before i do all that ill erase the chip. the programer burns the chip and it says device verify ok, so i think the chip is good and i try it and a solid cel. anybody have any ideas.

FooK 03-17-2006 09:16 PM
Re: soild cel after i burn my chip, can someone help me
 
Originally Posted by z6efboosted
the ecu is good because i have a good chip i use and a another for testing ---- or at least i try too. the chip im using is an sst27sf512, and the willem programmer burner or what ever its called. i found a write up on how to write a basemap and i go through all the steps and do as they say, and i save it. ill open up the burning program, which is 97ja, go to load, and find my bin and it says binary file loaded ok. before i do all that ill erase the chip. the programer burns the chip and it says device verify ok, so i think the chip is good and i try it and a solid cel. anybody have any ideas.
sounds like you're forgetting to type 8000 into the field labeled offset

jthelman 03-17-2006 10:06 PM
Re: soild cel after i burn my chip, can someone help me
 
Under the stupid things category, make sure you put the chip into the ECU with the correct orientation.

I was testing an updated tune one night, it went bad 2 blocks away. I put the "emergency backup" chip in rotated 180 degrees (------- dim dome light...) it results in a solid cel.

Good news is that it doesn't hurt anything. I hope it's something that simple!

turboD16crx 05-09-2006 12:54 AM
Re: soild cel after i burn my chip, can someone help me
 
Yeah sounds like you forgot to use the 8000 offset it will ask you to verify that you want to do it that way just click ok


All times are GMT -5. The time now is 12:30 AM.


© 2024 MH Sub I, LLC dba Internet Brands