SMC controller
 

I know I'm probably going to get my ass kicked for this but will the apexi afc hack work with obd0 (pm6 ecu) and also where is a good place to buy a smc controller? thanks for reply.

Re:SMC controller
 

Yes the hack will work on OBD0 ecu's. Your PM6 will be a good victim ;). Since your obd0 and your running the peak and hold 450's you won't need a resistor box because your car already has one installed for the factory 240cc peak and hold injectors.
I'm not sure whete to get the SMC anymore... I used to have the link but it seems to have dissapeared. Check the classifieds section at the bottom of the front page. I've seen a few in there for sale before.

Re:SMC controller
 

Re:SMC controller
 

Thanks guys that was really helpful still trying to work out my fuel needs for boostin 12 psi so help is greatly appreciated

Re:SMC controller
 

..read the Engine Management FAQ to help you decide on what 12psi needs. SMC, is not your answer.

Re:SMC controller
 

sorry im somewhat of a newbie to the forum dose it have a fact section or are you talking about on homemadeturbo.com faq page?

Re:SMC controller
 

No, it's a sticky thread I wrote at the beginning of this forum.

( https://www.homemadeturbo.com/forum/...threadid=14497 )

Re:SMC controller
 

thanks man