Setting Distro ( running TE)
 

well, my timing is set at about 3 degress below TDC, can i set it at 16 degress and as the ECU sees boost it will retard it accordingly or do i have to set it to a lower setting? Did i make sense?

I know that when you run the hack you have to retard it for the sake of boost but does it matter when your running turbo edit?

Re:Setting Distro ( running TE)
 

When running turboedit set the timing at the dizzy to stock, the ECU adjusts it wen it sees boost.

Matt

Re:Setting Distro ( running TE)
 

sweet ...so set it to 16 BTDC...no wonder my ---- boggs... :P

Re:Setting Distro ( running TE)
 

yup...bascially you setup how much the ECU retards timing during boost.

set the distro to stock 16 degrees

Re:Setting Distro ( running TE)
 

sweet...hey i missed out on that TE class..----! i been so busy around the house i havent had time to do ----. well, yesterday i reburned anoter chip on TE with a higher FTL set at 4000 RPM's ( i have the big ass Tbird Snail ) so it runs fine and i leaned it out a bit on idle cause it sat pig rich.

My buddy raLF has been helping me.

Re:Setting Distro ( running TE)
 

I like to make the idle portion of the map like this, so I can make 100% sure that Ive got the timing spot on.
You dont have to put it at 15 like this one is, I probably did it to try and bring the idle down a c-hair. Just set that portion of the map to 16, and then set the dizzy to 16 with a gun.
As always, make sure the car is fully warmed before setting.

http://a5.cpimg.com/image/21/6C/3499...-01B000F1-.jpg

Re:Setting Distro ( running TE)
 

you didnt miss anything...its going to be in January :)

Re:Setting Distro ( running TE)
 

woo hoo....

Re:Setting Distro ( running TE)
 

in referrence to your pic do you set it at 15 all the way across or only what i highlighted in red?

http://img138.exs.cx/img138/4127/map0fa.jpg

Re:Setting Distro ( running TE)
 

bump cause i want feedback from leed 8)