Running super lean
I used to run a little rich on my a/f guage, now it is all the way lean, only goes up a little when I am on the freeway at WOT. It never goes past stoich. Most of the time as far lean as you can go. Could it be the Ebay ecu chip I installed in my ECU? I have a b16a with PR4 chipped ecu and vtec controller
|
Re:Running super lean
sometimes those ebay chips will advance your timing.. You never know what those chips are doing. I'd say ditch the chip and see what happens.
Nick |
Re:Running super lean
I have the same problem, except it started when I installed my MSD 6A. I think the gauge is just screwwed because I put in 450 injectors and had gas coming out of my exhaust... and the gauge still said I was lean.
|
Re:Running super lean
Yeah get rid of that ebay chip.
|
Re:Running super lean
sometimes u can foul the o2 if you are too rich.
|
Re:Running super lean
That is probably the problem. If I unplug the O2 sensor, will that create problems with the ecu running lean?
|
Re:Running super lean
Test your wiring, then try a new O2 sensor, they run $20 for generic Bosch 1 wire. Sounds like old age or a bad connection got to you current one.
Beware of the eBay mystery chip, if you're trying to mix it with forced induction, then the ignition timing could be a very very scary thing. |
All times are GMT -5. The time now is 03:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands