running N/A with chipped ecu???
i have a chipped ecu for my turbo set up but i want to run N/A for a while.....is their anyway to make it run as it was stock?...mabe take the chip out?..or should i just buy a new ecu?
|
Re: running N/A with chipped ecu???
Either burn a chip with a stock map or pay someone to send you one
|
Re: running N/A with chipped ecu???
thanks man
|
Re: running N/A with chipped ecu???
You can either cut the jumper at J1 to return your ecu to stock or burn a stock bin on the chip, whatever's easier for you. Personally I would just burn a stock bin on the chip.
|
Re: running N/A with chipped ecu???
I would burn a stock chip as well but you could also just install your injectors for boost and run the "boost chip". You might notice some horrible gas mileage from not being tuned, but it's an option if you needed to.
|
Re: running N/A with chipped ecu???
Originally Posted by jagojon3
You can either cut the jumper at J1 to return your ecu to stock or burn a stock bin on the chip, whatever's easier for you. Personally I would just burn a stock bin on the chip.
ur running a y8 in an ek? conversion harness w/obd1 ecu? which ecu? |
Re: running N/A with chipped ecu???
naw my car isnt really running that great so im taking my turbo set up off and going to run N/A for a while..i just pm'd xeno about sending me a chip with a stock map on it...no im running a d16z6 5spd..so i have a p28
|
Re: running N/A with chipped ecu???
Originally Posted by jagojon3
You can either cut the jumper at J1 to return your ecu to stock...
|
Re: running N/A with chipped ecu???
Originally Posted by whiterice
if you have a p28 then just cut the jumper and it will run the stock z6 map. simple.
|
Re: running N/A with chipped ecu???
It's real easy. Take your ecu cover off and look around until you see "J1" labeled on the board. It will clearly label a single jumper wire. Cut that wire.
|
All times are GMT -5. The time now is 12:45 PM. |
© 2024 MH Sub I, LLC dba Internet Brands