question bout dsm 450's
#1
question bout dsm 450's
someone told me for my 92 integra, when i install the 450s that i dont have to add the little inline resistors because they already come low amped or something like that? is this tru, can i jus plug them in without redoing the wiring or will i have to wire them up? jus wondering so i dont do it if im not supposed to or so i can if i have to.
#3
Re:question bout dsm 450's
hope this helps...
Saturated Injectors:
1997-up Prelude VTEC
1992-95 Civic Si/EX
1996-00 Civic
1992-00 Integra LS/GSR/ITR
Peak & Hold Injectors:
1988-91 Civic/Crx Si/HF
1990-91 Integra
1992-96 Prelude non-VTEC
1992-96 Prelude VTEC
1g DSM Non-Turbo 4g63 240cc
2g DSM Non-Turbo Uknown if works
1g DSM Turbo Automatic 380cc
1g/2g DSM Turbo Manual 450cc
Blue tops are 1g DSM injectors, and black tops are 2g DSM injectors
Injector Write up completed by JT from H-T
Resistor Install by:
i think you will need to use the resistor box...check with others just to be sure..
Saturated Injectors:
1997-up Prelude VTEC
1992-95 Civic Si/EX
1996-00 Civic
1992-00 Integra LS/GSR/ITR
Peak & Hold Injectors:
1988-91 Civic/Crx Si/HF
1990-91 Integra
1992-96 Prelude non-VTEC
1992-96 Prelude VTEC
1g DSM Non-Turbo 4g63 240cc
2g DSM Non-Turbo Uknown if works
1g DSM Turbo Automatic 380cc
1g/2g DSM Turbo Manual 450cc
Blue tops are 1g DSM injectors, and black tops are 2g DSM injectors
Injector Write up completed by JT from H-T
Resistor Install by:
i think you will need to use the resistor box...check with others just to be sure..
#7
Re:question bout dsm 450's
90-91 integras have the resistor box stock...
92-93 integra do not and would need to add resistors to run DSM injectors
All 4 years are Gen 2 Integras how ever.
www.g2ic.com
92-93 integra do not and would need to add resistors to run DSM injectors
All 4 years are Gen 2 Integras how ever.
www.g2ic.com
Thread
Thread Starter
Forum
Replies
Last Post
highspeedhomie
General Discussion
13
01-17-2006 03:55 PM
racepak
Forced Induction
9
08-01-2005 06:53 AM