Question about dataloging with Turboedit & EcuControl

Reply Subscribe

Thread Tools

Search this Thread

02-07-2007, 07:03 PM

#11

f***myzc

1.0 BAR

Thread Starter

Join Date: Nov 2005

Posts: 267

Re: Question about dataloging with Turboedit & EcuControl

Damn just noticed today that the speedo is off also on ecucontrol, by like 20 mph

So ive got a problem somewhere. I also used my girls computer and it reads different from my computer but its still wrong. Same port settings and all. Is this normal?

02-10-2007, 09:45 PM

#12

wtg

0.5 BAR

Join Date: Jan 2005

Posts: 158

Re: Question about dataloging with Turboedit & EcuControl

man mine is doing the same thing i was datalogging today i was going about 30mph and it says i was going around 50mph and the boost was way off to it was all over the place i have a 3.6 psi spring in my wastegate which reads a steady 3 psi. it was saying i was running 10psi at one point no way that was right im stumped. afr is reading right rpm is right, looks like iat is correct and water temp.

02-10-2007, 10:43 PM

#13

f***myzc

1.0 BAR

Thread Starter

Join Date: Nov 2005

Posts: 267

Re: Question about dataloging with Turboedit & EcuControl

Well about the speedo gauge, ive read that its a common thing for it not to work

And for my other gauges they all seem to be pretty much right or close enough. Its just my vac/boost gauge is off in vac by like 4 or so. Close enough for me.

WTG is your tps reading right?

02-11-2007, 08:46 AM

#14

wtg

0.5 BAR

Join Date: Jan 2005

Posts: 158

Re: Question about dataloging with Turboedit & EcuControl

Quote:

Originally Posted by f***myzc

Well about the speedo gauge, ive read that its a common thing for it not to work

And for my other gauges they all seem to be pretty much right or close enough. Its just my vac/boost gauge is off in vac by like 4 or so. Close enough for me.

WTG is your tps reading right?

it looks very close yes not sure if it soppse to but it never goes to 100%it goes to like 98% at wot