ps9/pw0
ok i have a b16a1 with a pw0 ecu am i right in thinking in order to use vtec and boost i have to change to a ps9 ecu and all will be ok once mapped to use with te
|
Re:ps9/pw0
are you asking us for confirmation or are you stating that this is the case...?
|
Re:ps9/pw0
what car has the ps9??? never see this ecu!
where is the difference to a pw0? what is the advantage for boosting? Thanks Malte. |
Re:ps9/pw0
this ecu comes in the 1990-91 "US" civic ex automatic. or you can call it an automatic pm6.the advantages are its T.E. compatible and has the extra 12v output to drive the vtec solinoid which the pm6 does not.pwo/pr3 are not T.E. compatible for boost.
|
Re:ps9/pw0
ps9 is a 90-91 civic 4dr auto ;)
|
Re:ps9/pw0
---- you must have beat me buy 2 seconds :D
|
Re:ps9/pw0
Can you use the PM4 from the 90-93 tegs with an automatic ? The PS9s are hard to find.
|
Re:ps9/pw0
I haven't heard of that ECU..
Give it a try, and let us know. |
Re:ps9/pw0
Sorry I don't know what the numbers are for the ECU in the 90-93 teg with an automatic tranny. I know the 5 speed motors have a PR4, but will the ones from the automatic cars work the same as the PS9. Like I said the PS9s are hard to find.
|
Re:ps9/pw0
Well, if it's a USDM 90-91 Integra (92+ is OBD1) Automatic, it would still be a PR4.. manual or automatic.
There are a few bits of hardware to remove to make it manual, I think Chris would know more on that. ..but, no, from what I am aware of, the USDM auto PR4 (OBD0) will not work "as a" PS9 would. |
All times are GMT -5. The time now is 12:02 AM. |
© 2024 MH Sub I, LLC dba Internet Brands