prices on chipped ecu's and other questions
what should i expect to pay for a chipped p28? i was gona get one from the junkyard but that seems to be the one they don't have at any yards by me.. wonder why...
anyways, i have people trying to sell me un-chipped ones for upwards of 160-180 which seems crazy cause i've gotten ecus at the junkyard for $30 before but i guess p28's get snatched up huh i've found chipped ones for around 125-150 - good price? or u guys no where to get em cheaper? also i dont know alot about tunning yet but how do you interface with the ecu for tunning? data logging cable? then u need a burner to actually change the file on the chip? like i said i dont know much |
Re: prices on chipped ecu's and other questions
for a p28.....i've seen the price range from $100-$120 (because of the demand) so like you said, id keep searchin the junkyards. I've also heard you can use a po6 (and just do a v-tec conversion). and for the tuning you can download crome (it's free) and burn a basemap, and then you can get a cable (nokia phone cord) for data logging. you can find out alot of info about this from xenocron (hmt member) check out his site www.-------------
|
Re: prices on chipped ecu's and other questions
Originally Posted by 2stockrocketz
for a p28.....i've seen the price range from $100-$120 (because of the demand) so like you said, id keep searchin the junkyards. I've also heard you can use a po6 (and just do a v-tec conversion). and for the tuning you can download crome (it's free) and burn a basemap, and then you can get a cable (nokia phone cord) for data logging. you can find out alot of info about this from xenocron (hmt member) check out his site www.-------------
|
Re: prices on chipped ecu's and other questions
P28s are increasingly rare...I cant find them from Junkyard for less than $75-100, and I buy up to (20) at a time :6
|
Re: prices on chipped ecu's and other questions
I can get them from the junkyard at $50-75.
Stealthmode P28s are $140 shipped, Xenocron has his at $165. They are essentially the same price though. The Xenocron ones come with a basemap. That is what you are paying the $25 for. That is what you will pay though, not much of a way around it, unless you find one second hand. Just like anything else. |
Re: prices on chipped ecu's and other questions
|
Re: prices on chipped ecu's and other questions
Haha buk, plenty of DX ECUs in the $40-60 range.
|
Re: prices on chipped ecu's and other questions
----. p28 arent off of si's only?
i need to follow my own how to hang yourself directions :P |
Re: prices on chipped ecu's and other questions
Originally Posted by Joseph Davis
Haha buk, plenty of DX ECUs in the $40-60 range.
I only price them at $165 because I cant find them for cheaper and people still keep buying me out on a weekly basis :-\ BTW...this is Chris. I'm locked out of my xenocron name at the moment :-X |
Re: prices on chipped ecu's and other questions
so the dx ecu is p28 too?
my local junkyard has a bunch of them.. if i bought them.. is that a guarenteed sale here? |
Re: prices on chipped ecu's and other questions
Originally Posted by cj.automotive
Not anymore...I have to make at least 10-15 phone calls before I find someone dumb enough to let them go for that much. And when they do...they only have 1 or 2 available so shipping chews it up. I'm looking into JDM ECUs in the 100-200 qty for cheaper...but there is a bunch of bullshit and risk when it comes to that too.
I only price them at $165 because I cant find them for cheaper and people still keep buying me out on a weekly basis :-\ BTW...this is Chris. I'm locked out of my xenocron name at the moment :-X |
Re: prices on chipped ecu's and other questions
Chris, I might have a source of JDM ECUs lined up, probably get them for $20/per or less in quantity. I'd want 5-8 of them for personal bullshit, pass the rest along at whatever the cost is.
|
Re: prices on chipped ecu's and other questions
Originally Posted by Joseph Davis
Chris, I might have a source of JDM ECUs lined up, probably get them for $20/per or less in quantity. I'd want 5-8 of them for personal bullshit, pass the rest along at whatever the cost is.
You have my number ;) |
Re: prices on chipped ecu's and other questions
Gotcha.
Now, to remember to actually call them... |
Re: prices on chipped ecu's and other questions
ya i think the junkyards around me are on to this ----, any turbo part, or p28, or anything that can be used to make performance are snatched up and/or over priced. funny how i seen the floor behind the counter at one yard by me it was cluttered with dirty intakes, strut bars, superchargers n ----.
|
Re: prices on chipped ecu's and other questions
Originally Posted by cj.automotive
P28s are increasingly rare...I cant find them from Junkyard for less than $75-100, and I buy up to (20) at a time :6
|
Re: prices on chipped ecu's and other questions
Originally Posted by WTF
theres places out there that can copy a curcuit board and make to order, i forgot the site - and install the same ass components probly, wonder if that would be somthin worth checking into for you? make your own ecus?
|
Re: prices on chipped ecu's and other questions
Originally Posted by WTF
theres places out there that can copy a curcuit board and make to order, i forgot the site - and install the same ass components probly, wonder if that would be somthin worth checking into for you? make your own ecus?
It would be awesome to offer a NEW ECU like that though :-\ |
Re: prices on chipped ecu's and other questions
Mitsubishi makes ECUs for themselves, and a good chunk of the aftermarket standalone guys.
The AEM EMS engineers are mostly software engineers. |
Re: prices on chipped ecu's and other questions
Originally Posted by xenocron
I have serious contemplated making that investment. But there would have to be SERIOUS copyrite infringement issues on something like that...I wouldnt want to layout $10k and then get sued and not be able to use anything :-X
It would be awesome to offer a NEW ECU like that though :-\ |
Re: prices on chipped ecu's and other questions
huh.. anyways cray i talk to you on aim hope to get the ecu next week so i can stare at it and do nothing.. .cause i still need a harness n ----
|
All times are GMT -5. The time now is 12:38 PM. |
© 2024 MH Sub I, LLC dba Internet Brands