plugs are lookin a little white.....Zdyne question...
Zdyne SECU Gold, 450s, B18A, NGK 6's, 6psi...blah blah blah..
anyway i am wanting to add fuel just to the boosted section of the fuel maps but it will only select one cell, WOT (zero boost/vacuum), max boost (10.somthing psi), idle, or all. am i trying to do somthing stupid or is this just being difficult? also can someone explaing 'open loop' to me? |
Re:plugs are lookin a little white.....Zdyne question...
Send me the map your running, I'll make ya something :P
|
Re:plugs are lookin a little white.....Zdyne question...
Closed loop= Ecu uses O2 feedback and applies both longterm and short term changes to fuel maps. Cruising and throttle openenings up to about 12" of vacuum.
Open loop=No O2 feedback. WOT or above 12" of vacuum. Just for shits and giggles, can you email me your fuel table? leed16@hotmail.com |
Re:plugs are lookin a little white.....Zdyne question...
so at WOT there is no feedback from the O2 sensor? that sounds backwards...
sure i will email you my map.. |
Re:plugs are lookin a little white.....Zdyne question...
http://www.draglab.com/zdy/pr4mod.zdy
Try that one, I used alot of the tables from my ls/vtec fuel map, might be a little rich in some spots, but manageable. Dave's probably shittin his pants right now looking at your spark map, hahaha.. your running a pretty decent chunk of timing dustin. |
Re:plugs are lookin a little white.....Zdyne question...
lol
|
Re:plugs are lookin a little white.....Zdyne question...
what you not like my .7 or somthing retard? i want to go to the dyno, need 250 at the wheels....
|
Re:plugs are lookin a little white.....Zdyne question...
thanks Jeff that tune seems to work pretty well (got rid of that dead spot at zero boost/vacuum), except the fact that it is pooring down rain again and its a little hard to put down that power ::)
|
Re:plugs are lookin a little white.....Zdyne question...
Originally Posted by turbohf
what you not like my .7 or somthing retard? i want to go to the dyno, need 250 at the wheels....
Glad it works good, gotta swing by and gimme a ride. |
Re:plugs are lookin a little white.....Zdyne question...
Originally Posted by AbaZ
Originally Posted by turbohf
what you not like my .7 or somthing retard? i want to go to the dyno, need 250 at the wheels....
Glad it works good, gotta swing by and gimme a ride. Beau |
All times are GMT -5. The time now is 03:39 AM. |
© 2024 MH Sub I, LLC dba Internet Brands