PLEASE Need base map for built H22 t2/t4 with 780 injectors
 

I need a bin for a built .20 over 9:1 h22 with a t3/t4
The motor has about 300 miles on it now but i have been granny driving it with a base map set up for 450 injectors because its what i had befor.
If anyone can help me out please do.. Preferably someone who has a bin they use currently but either way i need the .bin

Re: PLEASE Need base map for built H22 t2/t4 with 780 injectors
 

uhhh it might help if we knew what rom editor you were using! and there are a few guys on here that if you paypal them a few bucks ( since they get paid to do this ----) they would be happy to make a basemap for you :-X

Re: PLEASE Need base map for built H22 t2/t4 with 780 injectors
 

just a base i made.

don't know how well it will work as far as boosting on it, I wouldnt trust anything without a wideband.

crome/780cc/t3t4/h22/rtp+datalog ready/closed loop/no knock/4800 vtec/8200redline

Re: PLEASE Need base map for built H22 t2/t4 with 780 injectors
 

Well i had a guy here in Jacksonville attempt to tune my car with crome and with the 780 injector base map it woudl not run SOOOOO lean....... but we tried it again on a 450 base map and it ran ok. has anyone have this problem befor? They are brand new percision 780 injectors. the tuner said he has had problems with percision 780's befor. my accord has a resistor box so its not that... any other ideas?

Re: PLEASE Need base map for built H22 t2/t4 with 780 injectors
 

did you run my basemap or are you referring to a different 780cc base?

Re: PLEASE Need base map for built H22 t2/t4 with 780 injectors
 

the tuner that was trying to tune your car knows what he's doing, nobody on here is going to be able to supply you with a better basemap, i promise. i tried to explain to you before you went to larry that it's not as simple as plugging in a basemap and driving it when you start dealing with larger injectors. it's not the basemap or the tuner, the problem is in the car, most likely the injector's.