PLEASE HELP FMU HOOK UP
08-13-2003, 09:24 PM
#1
0.0 BAR
Thread Starter
Join Date: Jun 2003
Posts: 6
PLEASE HELP FMU HOOK UP
I am currently installing a vortech fmu and desperately need to know how to run the vacuum lines.
Also i need to know how to run the map sensor lines. Help me out with pictures or links or somethign thanks.
Also i need to know how to run the map sensor lines. Help me out with pictures or links or somethign thanks.
08-14-2003, 03:04 PM
#6
3.0 BAR
Join Date: Feb 2003
Posts: 9,089
Re:PLEASE HELP FMU HOOK UP
i'd say how to install an FMU is ok in the engine management forum..
But yes. you need to connect the vac line to a vacuum source. Many people install it on the stock FPR vac line (the line coming out the top).
And what about the MAP I dont understand what u are asking about it.
But yes. you need to connect the vac line to a vacuum source. Many people install it on the stock FPR vac line (the line coming out the top).
And what about the MAP I dont understand what u are asking about it.
08-17-2003, 09:30 PM
#7
1.0 BAR
Join Date: Jun 2003
Posts: 278
Re:PLEASE HELP FMU HOOK UP
Just take the return line from the fuel rail and hook that up the the Fuel In fitting on the FMU. Buy some hose and run it from the Fuel Out of the FMU back to the return line. Tap the vacuum right from the stock FPR vac line.
As far as your MAP question are you using check valves or what are you doing? (Dont really understand your question)
As far as your MAP question are you using check valves or what are you doing? (Dont really understand your question)
Thread
Thread Starter
Forum
Replies
Last Post
racepak
Engine Management
0
12-01-2006 06:46 AM
