P70 ECU... ever heard of it??
 

i have a strange ass ecu here and im trying to figure out what its from

it says P70
its OBD1
its like 3/4 the size of a standard honda ecu
it behaves similar to that of a p28 (redline, vtec etc)
it came socketed stock
also, it doesnt have the smaller blank chip in it.
there is no jumper wire, and if i remove the chip, i get a solid CEL.
i also noticed that it doesnt look for a vtec pressure switch.

any 1 have any clue as to what car this may be from?

Re:P70 ECU... ever heard of it??
 

Is it a JDM ecu, some of those are smaller.
steve

Re:P70 ECU... ever heard of it??
 

ye, but ive never seen 1 chipped stock...

Re:P70 ECU... ever heard of it??
 

P70 : 92-95 OBD-1 Domani (sohc vtec zc - no oil pressure sensor reading)
http://www.honda.co.jp/factbook/auto...ge/004-006.gif

Re:P70 ECU... ever heard of it??
 

some obd1 ecu's use an external rom like the obd0 ecu's, all you have to do is remove the stock eprom, and solder in a zif socket and you're good to go.

Re:P70 ECU... ever heard of it??
 

I had a problem with the auto po8's. Converting to 5 spd work but gettin it to run an external rom wasnt happen. Funky ecu alot of the jdm stuff is a little odd.

Re:P70 ECU... ever heard of it??
 

the process of converting a jdm auto ecu to manual is different than converting a usdm ecu. you don't just jump rp18, but actually have to change the value from 2.4 ohm to 1.4 ohm, that may be your problem there ;)

Re:P70 ECU... ever heard of it??
 

actually from my experince rp17 just needs to be removed. I have done this to alot of ecu's of the years and never had any problems