traff1c

Is it possible to chip an Automatic P28, to work in an automatic tranny equiped vehicle?

Just wondering if this is possible

stenseltizm

nope, send it to me and I'll send you a chipped manual one.

Yeah just don't do anything to the resistors in the lower right, and leave the high side switches in below the vtec ones that everyone steals to convert a p06.

Chris Harris

Not with a D-Series...

Has to do with if the setup has an external TCU...D-Series do not. B-Series and H-Series do...so they will work generally.

stenseltizm

What? If you chip an auto P28 and don't convert it to manual it will work perfect. I have done it myself after searching on here and I think leed telling me he did it to one of Jeff's rides.

It was actually on Sinister's 1st turbo project and that was about as far as he got, I chipped an ecu for him and put a stock map on it. It was actually an auto p06 I converted to vtec.

here it is:
https://www.homemadeturbo.com/forum/...?topic=78456.0

If you don't have a d-series is when you need to worry about the TCU and adding them in with a jumper harness.

turbo4life

automatic boost you think this would work on a 96-00 auto civics converted to obd1 or the trans have more solenoids on them.. just a intresting tought..