p06 manuel - auto
 

i plan on runin a turbo on an auto trany till it blows then im going to swap in an 5 speed...ive read a ---- load of post and i know that an auto ecu can be changed to work with 5 speeds but im wondering if i can be vise versa

can manuel p06 be tuned to work with an auto

and can manuel p06 allready chipped be tuned to work with an auto or do i have to get a virgin

Re: p06 manuel - auto
 

Why would you wait for something to break when you could sell it now and probably get a manual tranny for what you make on the auto? Then you wouldn't have to to all that work and add the auto trans circuitry to the ecu and the auto program. Also the auto trans will hold up for a long time unless you are making a lot of power.

Re: p06 manuel - auto
 

becuase i want to install the turbo by the end of march and i wont have the standerd swap parts for 2 mounths after that.. and ive read over at cb7tuner auto tranys dont last for ---- with turbos and mines not in terible condition but its a lil worst than most would be at 114000 miles... i also have enough money for the standerd trany and all the parts so im not worried about sellin this one to get 100 bux..ill just run it out till its done then ill have all the standerd swap ---- ready..........and im not a tuner i can do the acctully turbo install but i cant tune....all i want to know is if i had a chipped manuel p06 and gave it to a tuner would he be able to make it work well with my auto

Re: p06 manuel - auto
 

Without having done it myself... I would just say reverse the auto to manual stuff. However, there could be different compoentents are required that aren't document due to the fact that you're just "removing" things to keep the ALS from throwing a code.

Re: p06 manuel - auto
 

Yeah, there is defintely much more that needs to go in that come out when making it a manual ECU.

Easier to just find an Auto ECU and add VTEC or find an Auto P28 and be set.

Re: p06 manuel - auto
 

no vtec...................--- f22a6

Re: p06 manuel - auto
 

question about this if i use a manual p28 chipped on a 91 accord auto sould it work fine ?

f22a1 with a basic t3 450cc injector , works fine on afc . with the basemap i cant even start the car so i m wondering if it's either a broken chip ( bought only 1 with my burner) or if its the fact im trying to run a manual basemap over an auto

Re: p06 manuel - auto
 

I dont think the fact that you are using a manual ECU on an Auto Tranny car would make it not start...but when you do get it started, it may not go into gear or shift through the gears.

Re: p06 manuel - auto
 

It'll satrt but it will not shift the gears. You will have to manually up shift like your 16 again in your moms accord :)