So I picked up a P06 and chiped it, and converted it to vtec. I also picked up the wiring harnes from obd2 to obd1. I need to know what I need to do to make the IABs work on the intake. I havent tried it yet, but I heard that I have to run the gsr P72 code to make it work. Dose anybody no if this is true or not? Its just a stock H22 with i/h/e and a xtd 6 puck clutch. Im puting togeter a turbo setup for this guy I know and Im putting it on his lude. Gona do a low boost setup on it. Im thinking 6-8 lbs shoud do real nice.

 

yes you need the p72 code,
you also need to modify the p06 to add IAB control

 

Is there a write up somewhere on how to mod the p06 to make it run IAB's? I did a search and didnt realy find much.

 

pgmfi archives has it, i have it saved somewhere on my other lappy. I'll post it up later.

Edit: my programmer already had this ---- booted up, here it is:
http://web.archive.org/web/200512302...ry/AddIABToP28

you can find pretty much everything you need on that site, you just have to do a bit of searching to find a complete archive sometimes.

I'd go with the OBD1 style of wiring it's easier to mod the ecu. one you are running ecu to iab's to ground, and the other is ecu to iab's to 12v+ so it's no big deal to switch around. just look in there and it should tell you which is which

 

You da man