ostrich and sst chip AFR's diferant
03-21-2006, 05:18 PM
#1
0.0 BAR
Thread Starter
Join Date: Mar 2003
Posts: 0
ostrich and sst chip AFR's diferant
okay i read that other people had the same problem in the past but what did you guys do to fix it or has anybody figured out a way around it? i read that somebody said they just copied the tables into another map that has never been into the ostrich before, anybody try that with success?
another question, what does the "use as 27sf512" check box do in crome?
another question, what does the "use as 27sf512" check box do in crome?
03-22-2006, 01:37 AM
#2
0.0 BAR
Thread Starter
Join Date: Mar 2003
Posts: 0
Re: ostrich and sst chip AFR's diferant
okay i just loaded soem random *** bin from xenocron's site and it runs perfect. now i am so stummped why it does this but will run good with some other ----. think maybe i can just copy and past my fuel values into the new one? worth a shot i guess 
03-22-2006, 02:33 AM
#3
0.0 BAR
Join Date: May 2005
Posts: 0
Re: ostrich and sst chip AFR's diferant
The check box for 27SF512 is for when you use the BURN1 and have an SST 27SF512 chip in it, otherwise uses the burn1 setup for Atmel 29C256.
As for the A/F being different using the ostrich and chips. I have never noticed a problem. I've used them all (ostrich, ATMEL, SST, OTP's, UV's) and have never seen a difference.
As for the A/F being different using the ostrich and chips. I have never noticed a problem. I've used them all (ostrich, ATMEL, SST, OTP's, UV's) and have never seen a difference.
03-22-2006, 10:58 PM
#4
3.0 BAR
Join Date: Jul 2003
Posts: 6,449
Re: ostrich and sst chip AFR's diferant
The only issue I ever have is with the idle area...I always have to richen it up about 3% after tuning and using the Ostrich.
Amtel or SST chips though I always have that issue...never found a fix or why.
Amtel or SST chips though I always have that issue...never found a fix or why.
03-23-2006, 01:33 AM
#5
0.0 BAR
Thread Starter
Join Date: Mar 2003
Posts: 0
Re: ostrich and sst chip AFR's diferant
found somewhat of a fix, i DL'ed a map from your site and just pasted everything but the idle into it. i guess it works for now but would really like some sort of a technical answer of why it does this from the developers of both the ostrich and crome.
03-23-2006, 02:06 AM
#6
1.5 BAR
Join Date: Nov 2005
Posts: 828
Re: ostrich and sst chip AFR's diferant
hrm, i sort of have the sma issue but mine is an electrical problem. my wideband reads 13 and ecucontrol says 13-14 ish
but if i turn on my headlights, my wideband reads 13 and ecucontrol says 10, haha.
this is because i must have installed my wideband wrong and did not use the capacitors, so i'm no help.
but if i turn on my headlights, my wideband reads 13 and ecucontrol says 10, haha.
this is because i must have installed my wideband wrong and did not use the capacitors, so i'm no help.
Thread
Thread Starter
Forum
Replies
Last Post
TomBones
Engine Management
30
03-01-2009 05:30 PM
