HomemadeTurbo - DIY Turbo Forum - one wire vtec install with zdyne?

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Engine Management (https://www.homemadeturbo.com/engine-management-10/)

- - one wire vtec install with zdyne? (https://www.homemadeturbo.com/engine-management-10/one-wire-vtec-install-zdyne-22607/)

crx4life2003

06-27-2004 11:44 PM

one wire vtec install with zdyne?

Which pin do you ohave to switch out to use the one wire?The paper says A8 and that is what I did however it made that priming sound when you turn the ignition on but only this time it stayed on? Are you supposed to splice in the existing a8 wire with the new vtec wire? My car was wired for vtec previously with a pr3. Or to run vtec with my zdyne i need to connect the ecu were they ask to use vtec?

TurboEF9

06-28-2004 12:11 AM

Re:one wire vtec install with zdyne?

If it ran VTEC with a PR3.. the Zdyne isthen plug and play.

A8 is run from the ECU harness to the VTEC solenoid.

All times are GMT -5. The time now is 12:27 AM.