obd2 to xenocron
ok i want to switch my obd2b to obd1 so if i bought the chipped ecu on xenocrons site with vtec , i would also need a eprom burner and harness right? so i need that ecu ,eprom chip burner,harness can i change out the eproms in that ecu?any thing else i would need ill be running uberdata. thank you
|
Re: obd2 to xenocron
Originally Posted by tuname420
ok i want to switch my obd2b to obd1 so if i bought the chipped ecu on xenocrons site with vtec , i would also need a eprom burner and harness right? so i need that ecu ,eprom chip burner,harness can i change out the eproms in that ecu?any thing else i would need ill be running uberdata. thank you
Just send Xenocron a PM and he'll advise you. |
Re: obd2 to xenocron
To switch an OBD2 to an OBD1
you would need a: - harness (OBD2b or OBD2a to OBD1) - ECU (chipped or stock) if you get a chipped ECU , yes, you will need a way to burn chips (chip burner) |
Re: obd2 to xenocron
do u have any ecu's in stock rite now? im going to order a ecu, harness, and the willem burner and some eproms. and do i have to be able to datalog? if i do then im going to order the $305 package jw if u have this stuff i get my paycheck this monday so im going this way instead of afc thanks for your time
|
Re: obd2 to xenocron
Yes, everything is in stock...PM me next time please :)
|
Re: obd2 to xenocron
And if you are a Y7 OBDII you need to switch to a 2 wire IAC valve setup.
|
Re: obd2 to xenocron
im a d16y8, i read in my haynes manual it sais cars with d16y7 and auto have the rotary iac valve. and the others have linear idle air controle 2 pin connector ..
1.so i wouldnt have to do anything and i can leave this alone right? 2.do i have to change anything else to run obd1 on obd2b except harness |
Re: obd2 to xenocron
option 1
|
All times are GMT -5. The time now is 01:18 PM. |
© 2024 MH Sub I, LLC dba Internet Brands