|
OBD2 TO OBD1
I wana get a 6thgen civic but i wana run uberdata. someone please just explain to my dumbass how, in retard english, i have posted same topic before but never got the help i needed.
|
Re:OBD2 TO OBD1
obdII to obdI conversion harness. obd1 ecu.
anything i missed? |
Re:OBD2 TO OBD1
where to get harness?
|
Re:OBD2 TO OBD1
most online stores carry them
jhpusa.com jdmshit.com |
Re:OBD2 TO OBD1
Get the conversion harness at www.jdmshit.com .
Then get a Y8 intake with a 2 wire IAC valve unless you have an EX. You will need to convert to a 2 wire IAC. Then you will need a set of OBDI style injector clips for your new injectors unless you buy new model specific ones. |
Re:OBD2 TO OBD1
:o, thats all i have to do to run uber???? you guys ------ suck, you had me thinkin that there was no hope for me at all. ;D i think i have a new project in the works ;)
HOLY ----, it's only $85 for the conversion harness!!!! hell yeah chipped ECU here i come. ;D ;D |
Re:OBD2 TO OBD1
why the hell are obd0-obd1 conversion harness so much more expensive? is it hard to get the obd0 female ends? quick question also..can i use uberdata on a 92 pr4 ecu? i know its obd1 but wasn't sure if only cetain obd1 ecus were compatible
|
Re:OBD2 TO OBD1
Originally Posted by absolutezroo
.can i use uberdata on a 92 pr4 ecu? i know its obd1 but wasn't sure if only cetain obd1 ecus were compatible
|
Re:OBD2 TO OBD1
cool..i'll have to get you to hook me up with datalogging and what not once i get my obdo obd1 conversion finished
|
Re:OBD2 TO OBD1
Originally Posted by absolutezroo
why the hell are obd0-obd1 conversion harness so much more expensive? is it hard to get the obd0 female ends? quick question also..can i use uberdata on a 92 pr4 ecu? i know its obd1 but wasn't sure if only cetain obd1 ecus were compatible
|
Re:OBD2 TO OBD1
yeah, but if you chip your ecu with uberdata, you can disable the o2 sensor heater and not have to worry about converting to a 4 wire, you can also disable knock, and not have to worry about that ;)
|
Re:OBD2 TO OBD1
you dont have to change injector plugs or anything like that. convrsion harness and OBD1 ECU and thats all.
|
Re:OBD2 TO OBD1
Originally Posted by 91civicZ6
you dont have to change injector plugs or anything like that. convrsion harness and OBD1 ECU and thats all.
|
Re:OBD2 TO OBD1
Who are you trying to tell? I have done 2, 6th gen cars. YES YOU NEED TO CHANGE INJECTOR CLIPS. OBDII injectors plugs will not fit DSM injectors are most anything else.
|
Re:OBD2 TO OBD1
Originally Posted by CSaddict
Who are you trying to tell? I have done 2, 6th gen cars. YES YOU NEED TO CHANGE INJECTOR CLIPS. OBDII injectors plugs will not fit DSM injectors are most anything else.
ha, yes they do.......... http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg :-* |
Re:OBD2 TO OBD1
looks like my old clips ;D
|
| All times are GMT -5. The time now is 10:01 PM. |
© 2024 MH Sub I, LLC dba Internet Brands