HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   obd2 managment? (https://www.homemadeturbo.com/engine-management-10/obd2-managment-19070/)

T25Sol 04-18-2004 12:39 PM

obd2 managment?
 
Whats a good OBD2 managment option? Most are aimed towards obd1, obd0. I want to eventually run a good amount of boost, 1 bar or up with internals. Can I use dsm 450cc injectors? How much hp can they handle?
Thanks,
Nick

beerbongskickass 04-18-2004 01:52 PM

Re:obd2 managment?
 
I would convert to obd1 and run uberdata since your eventually going to run more boost. DSM 450cc injectors at 42 psi fuel pressure max out at about 300whp.

T25Sol 04-18-2004 02:15 PM

Re:obd2 managment?
 
What do I need to convert? How much would it cost for conversion+uberdata?
Thanks beerbongs,
Nick

OnYx 04-18-2004 03:27 PM

Re:obd2 managment?
 
$100 ish for the harness and depends on the ECU. i can chip and convert a Po6 non-vtec ECU to a chipped VTEC ECU for $110

T25Sol 04-18-2004 07:11 PM

Re:obd2 managment?
 
So 210 for ALL fuel managment (minus injectors)......thats all I would need? conversion, ecu and injectors?

SmoothGS 04-18-2004 07:19 PM

Re:obd2 managment?
 
I'm doing the same plus 255lph fuel pump.

OnYx 04-18-2004 08:39 PM

Re:obd2 managment?
 
the OBD 2 injectors are the same as OBD 1

projekteg 04-19-2004 11:25 AM

Re:obd2 managment?
 

Originally Posted by onyx
the OBD 2 injectors are the same as OBD 1

i think he meant 450's ;)

T25Sol 04-19-2004 05:32 PM

Re:obd2 managment?
 
Yup, I meant 450's lol.

SpankedYA! 04-19-2004 08:15 PM

Re:obd2 managment?
 
You would also need the clips for the injectors. I just got some for mine! The OBD II honda ones dont fit correctly or at all from what I can see.

T25Sol 04-19-2004 08:48 PM

Re:obd2 managment?
 
Where can I pick up some clips? How much did you pay for your if you dont mind me asking....
So for managment, I need:
JDMsh!t ECU Adapter Harness (obd2->obd1)
Uberdata chipped p28 ecu
DSM 450 injectors
and clips

is that it?
Thanks.

SmoothGS 04-19-2004 10:31 PM

Re:obd2 managment?
 
I think you need a resistor box too for the injectors, someone can confirm this.

OnYx 04-19-2004 10:36 PM

Re:obd2 managment?
 

Originally Posted by T25Sol
Yup, I meant 450's lol.

aaaahhhh.. fine :P

T25Sol 04-19-2004 11:23 PM

Re:obd2 managment?
 
Ya, I can just get some resistors at radioshack.

96turbohacth 04-20-2004 01:59 PM

Re:obd2 managment?
 
hi iam new to boosting honda. i have a 96 civic hatch back i have a 14b turbo off of a 1st eclipse along with bov and smic and 450 injectors. i have a safc 2 and i need some serious help. i need to know what kind of settings i need to have in order for it to run properly. if some one can help me. i would appreciate very much thank you.

LSD Motorsports 04-21-2004 02:28 AM

Re:obd2 managment?
 
www.boomslang.us for your conversion harness, good prices for very professional ----


All times are GMT -5. The time now is 12:13 AM.


© 2024 MH Sub I, LLC dba Internet Brands