OBD1 ecu running obd2 trans
 

I have an auto obd2 trans, can i run an obd1 ecu with conversion harness and still be able to use the obd2 trans? or do I need to get an obd1 transmission?

Re: OBD1 ecu running obd2 trans
 

You talking chipped or stock?

Re: OBD1 ecu running obd2 trans
 

chipped. i was talking with the guy who made my harness, and he said it mgiht not work because of the obd2 transmission. but if the ecu is chipped, would it work then?

also, i'll prolly be pming you in a week or so about getting an ecu chipped. i think kevin dicked me over, i havent heard ---- from him in over 3 weeks about my ecu, and i pm'd him serveral times. so im prolly gonna ahve you chip an ecu for me, unless you have ecu's ready to be chipped...

Re: OBD1 ecu running obd2 trans
 

Check General Discussion, kevin put up a thread in there and your name is on the list he shipped. he wouldnt dick you over...

As far as I know, OBD1 D-Series motors can run an auto ECU on Uber/Crome, but the B-Series cannot. I dont know how this is affected when you cross over to OBD2

Might want to search around and post on PGMFI

Re: OBD1 ecu running obd2 trans
 

ugh, i tried everything, and it fires with the stock ecu. ima try one more thing. can i send you my ecu (got ti back from kevin today) and you POSSIBLY rechip it and ----, just on the case that it MIGHT have been a bad chip or something, not quesationing kevins chipping skills, but im running outta ideas here, and if i cant resolve this, hondata or vafc II might be the only way :-\

Re: OBD1 ecu running obd2 trans
 

I'd rather you find an unchipped ECU and send it to me. I'll do it for a bit less than my normal fee since you have been having problems getting this to work.

Re: OBD1 ecu running obd2 trans
 

alright, do you recommend a certain ecu? like p28 (i think) or something else? or just any one will do? (im goin to the junkyard saturday)

Re: OBD1 ecu running obd2 trans
 

If its non-vtec, get an auto P06, if its Vtec, get an auto P28

Re: OBD1 ecu running obd2 trans
 

it's not the ecu, it's the harness, i bet 50 bucks. i tested the ecu in my car, and then even tested it in an obd1 auto car as well (that's what took so long, i had to find someone with an auto obd1 to be completely sure). there is only one person making obd2->obd1 auto conversion harness', and even he claims they 'may not work'. who did your conversion harness? do you get cel's? do you have your injectors wired up corectly? have you checked for spark on each of the plugs?

Re: OBD1 ecu running obd2 trans
 

I got my harness from http://www.jkobd.com/, chris refered me to him. He said he tested the harness and it seemed ok, but he mentioned something about the transmission. I'll email him again and try explaining to him whats going on, or since you know him personally chirs, think you mgiht be able to help me out?

I got no spark or fuel with the obd1 ecu, took off the wires and tested each one, nothing. Then steve told me to put a screw driver on the injector to listen for a click, did it on all of em, nothing. I did get a cel when i tried starting it with the obd1 ecu. Then I got bored and curious and tried starting it with the stock ecu, and it did fire for about 5sec, and exhaust did come out, and there was fuel and spark.

Im stumped here.... :-\