obd0 to obd1 conversion harness excel files
#31
Re:obd0 to obd1 conversion harness excel files
The Excel files work fine for me, although I had to load Internet Exploder to download them. Won't work in FireFox. Just click the link for the .zip file, change the extension from .htm to .zip and open it.
#32
Re:obd0 to obd1 conversion harness excel files
Man, am I just missing something here? Everytime I click on any of those links, I just get a new Explorer page with a bunch of symbols and letters. You guys make is sound so easy, but are you leaving out some steps that us computer ignorant folks don't know?
#34
Re:obd0 to obd1 conversion harness excel files
Originally Posted by crx88Si
RIGHT CLICK SAVE AS, Change FILE TYPE to "All Files" replace .html w/ ".zip" , done.
#36
Re:obd0 to obd1 conversion harness excel files
Jason, I'm not following you (please excuse the ignorance). Are you saying I should use a OBD1 ECU from an Integra? I've got a P75, but again, the pinout on my PJ0 is different than any OBD0 ECU pinout that I can find, so all the OBD0 to P75 conversion that I've seen don't help me.
#38
Re:obd0 to obd1 conversion harness excel files
Originally Posted by leed
I used the same link that Jason used a few weeks ago for my new conversion harness. All worked out well. Started right up.
#39
Re:obd0 to obd1 conversion harness excel files
Originally Posted by Kyle
Originally Posted by quadnie
well ----, "in theory" communism works.. I think kyle might attempt it; let's make him our ginny pig.
sure, I'll try communism for a while, you guys just have to send me some people to try it with, I have a pretty good sized desert near my house, I'll set up an area to host a community.
if I could get an ecu with the plugs and a distributor I'd do it and then test it on my car, any help with that?
#40
Re:obd0 to obd1 conversion harness excel files
thats great and dandy but you need be specific.
OBd0 PM6. to obd1 P28 ( not p08/P30)
since it does not concern Pm5 or the lesser obd0 ecu's
you try wire that crap in the hopes of going from DX_TBI-OBD0 to SI or EX_MPFI-obd1. and your screwed..
dx wire are similar only in the 90-91 dx the 88-89 dx wiring is diffrent a little i noticed .... (this why my ---- don't work) depedning on production date. more so diffrence accure in 88 Dx model 4 speeds.
has any one wired a 88 DX 4 speed hatchback (not CRX) before?
falkhen
spits and chews nails
OBd0 PM6. to obd1 P28 ( not p08/P30)
since it does not concern Pm5 or the lesser obd0 ecu's
you try wire that crap in the hopes of going from DX_TBI-OBD0 to SI or EX_MPFI-obd1. and your screwed..
dx wire are similar only in the 90-91 dx the 88-89 dx wiring is diffrent a little i noticed .... (this why my ---- don't work) depedning on production date. more so diffrence accure in 88 Dx model 4 speeds.
has any one wired a 88 DX 4 speed hatchback (not CRX) before?
falkhen
spits and chews nails