obd0, obd1 conversion crx question
 

hey guys, just had a question on converting obd0 to obd1 ecu. i'm swapping in an b18a obd0 into my crx, but want to use some type of engine management like hondata. they only make it for obd1 and above ecu's. i saw a harness that is sold for that conversion, what other things would i need to do to complete the conversion 4 wire O2 and obd1 dizzy? thanks

Re:obd0, obd1 conversion crx question
 

..not to knock OBD0 to OBD1 conversions... but have you checked http://www.TurboEDIT.org?

Re:obd0, obd1 conversion crx question
 

check out www.carsongarage.com

Re:obd0, obd1 conversion crx question
 

Hell YEAh ---- Obd1!

Re:obd0, obd1 conversion crx question
 

You would recommend an OBD0 to OBD1 conversion for this user, then they would have to buy a new ECU, chip or have it chipped to run an engine management system "like Hondata"?

Cruel.

Re:obd0, obd1 conversion crx question
 

I did the conversion. Its a pain in the ass. Cost alot too.
ECU: $100
DIZZY: $150
CONVERSION HARNESS: $200
4 WIRE O2 SENSOR: $50
TOTAL: $500
KNOWING THAT NOBODY THAT YOU KNOW KNOWS HOW TO DO THIS SO YOU SEND A YEAR TRYING TO FIGURE IT OUT: PRICELESS
And now that my car only runs half a second faster than my dx engine it pisses me off.

Re:obd0, obd1 conversion crx question
 

just get a zdyne ecu

Re:obd0, obd1 conversion crx question
 

Damn dude, sell ur car!

Anyways, I do obd1 conversions on every pre-92 car I own... but that's because they all have vtec - Sohc vtec, LSVtec, etc. and PR3/PW0 ecus SUCK!! However, you are putting a LS in ur car... I don't get it... there is no advantage to doing the conversion... Zdyne and turboedit work great, y would u spend 3-400 + 6-800 on converting+hondata when you could have ur ecu chipped for under $100...