obd0 management
 

I'm working on my first ever turbo set up, trying to hook it all up to a 91 accord ex. I've read that they have an obd0 ecu, which is fine, but what I wanted to know is what to use to be able to apply different fuel maps. I don't want to convert it to obd1, so I'm pretty sure hondata is out. I just want to be able to have a daily driver that isn't going to fry my rings or anything. All the info would be great...

Re: obd0 management
 

Well for OBD0 you have Turbo Edit,BRE and Zydyne.The first two are free and the third is fairly expensive at roughly $500.What ECU is in your Accord?I thought those Accords were more like a OBD1 wiring and for management you use a PO6 or similar and run a OBD1 program such as Uberdata or Crome.I dont know alot about them so maybe someone else will chime in .www.pgmfi.org That is a great site for learning about the DIY engine management and I suggest you go there and start reading and searching on the Accord as Im sure it has been covered.

Re: obd0 management
 

Appreciate the help, I've read in a couple of different places that my accord has an obd0, and others have said obd1. If it is an obd1, I've heard that those are a lot easier to tune.

Re: obd0 management
 

Well from what I understand the Accords from those years are electrically compatable and the harness matches up with OBD1 ecu's.This means you can run a PO6 if your non vtec and they are readily available and cheap.Isnt CB7 tuners a Accord site for that vintage?I might be wrong on that though.There are some Accord guys on here so maybe double check that before going off and buying a ecu etc.