New Writeup for Uberdata - Quick Disconnect Datalogging Cable install
|
Re: New Writeup for Uberdata - Quick Disconnect Datalogging Cable install
Nice Terrabomb I like it. I've been trying to come up with a way to make a removable USB (Nokia) cable. It would just be alot cleaner and less clutter without it being installed all the time. So, from your pictures it looks like you used a male DB9 connector. Then you mentioned about hooking up your "phone" cable. I assume there's some sort of Serial to USB adapter in there at the DB9 and USB cable?
|
Re: New Writeup for Uberdata - Quick Disconnect Datalogging Cable install
You can also just use a female 4-pin header connector. Easily removable, and you datalog with the top off anyway ( when tuning) But that is nice and clean.
|
Re: New Writeup for Uberdata - Quick Disconnect Datalogging Cable install
my bad. I got the ends mixed up I guess. Yea I'm updating the pics of the cable here now.
|
Re: New Writeup for Uberdata - Quick Disconnect Datalogging Cable install
there I just updated it with some more pics of the cable and my cable?
|
Re: New Writeup for Uberdata - Quick Disconnect Datalogging Cable install
(Copied reply from Ubersite)--"Nice Job :D I like that idea alot instead of having to leave a cable permanently installed in the ecu. I may give this a try the next USB mod I do (thumbsup)". Thats the best Dloging vid I've seen ;)
|
Re: New Writeup for Uberdata - Quick Disconnect Datalogging Cable install
thanks man. I'll do one on a simple switch to change back from stock to chip programming this week sometime. I gotta get the video of my FTL working up on the net. I don't know why I haven't seen it before
|
Re: New Writeup for Uberdata - Quick Disconnect Datalogging Cable install
Yeah...you can just use the molex parts to solder in the header to the ecu and attach the female end to the cable.
Its what I do but your write-up is clean and people love pics :) |
Re: New Writeup for Uberdata - Quick Disconnect Datalogging Cable install
Craig: Couldn't have been done with out the willem. Thanks bud. I should have taken your advice about the moates now though. I gotta build a box for the willem out of fiberglass so I don't break it while driving. I gotta pretty good idea on a glove box setup.. I'll post pics when I get it done.
|
Re: New Writeup for Uberdata - Quick Disconnect Datalogging Cable install
Originally Posted by Terrabomb
Craig: Couldn't have been done with out the willem. Thanks bud. I should have taken your advice about the moates now though. I gotta build a box for the willem out of fiberglass so I don't break it while driving. I gotta pretty good idea on a glove box setup.. I'll post pics when I get it done.
|
Re: New Writeup for Uberdata - Quick Disconnect Datalogging Cable install
lmfao chris I meant.. my bad. Was talking about the moates at the time and got the names mixed up.
|
Re: New Writeup for Uberdata - Quick Disconnect Datalogging Cable install
Originally Posted by xenocron
Originally Posted by Terrabomb
Craig: Couldn't have been done with out the willem. Thanks bud. I should have taken your advice about the moates now though. I gotta build a box for the willem out of fiberglass so I don't break it while driving. I gotta pretty good idea on a glove box setup.. I'll post pics when I get it done.
|
Re: New Writeup for Uberdata - Quick Disconnect Datalogging Cable install
i did something like that this weekend because i hated to have to keep taking that kick panel off to get to the ecu. but i am using the serial cable. i ran the serial cable from the ecu to behind the glove box, cut out a spot for it and secured it in with the screws. now if i need to hook up to it all i do is open the glove box and plug in my 4 foot cable.
|
Re: New Writeup for Uberdata - Quick Disconnect Datalogging Cable install
Originally Posted by xenocron
Originally Posted by Terrabomb
Craig: Couldn't have been done with out the willem. Thanks bud. I should have taken your advice about the moates now though. I gotta build a box for the willem out of fiberglass so I don't break it while driving. I gotta pretty good idea on a glove box setup.. I'll post pics when I get it done.
|
Re: New Writeup for Uberdata - Quick Disconnect Datalogging Cable install
where did you get the 'phone' serial to usb cable?
thanks for the writeup 8) |
Re: New Writeup for Uberdata - Quick Disconnect Datalogging Cable install
Originally Posted by lkailburn
where did you get the 'phone' serial to usb cable?
thanks for the writeup 8) I did that set-up on MNCRXSi's ECU, works really well. I got the idea back in the day from Projekteg using the serial cables with the maxx32. Nice write-up though. |
Re: New Writeup for Uberdata - Quick Disconnect Datalogging Cable install
Originally Posted by Cray91
Originally Posted by lkailburn
where did you get the 'phone' serial to usb cable?
thanks for the writeup 8) I did that set-up on MNCRXSi's ECU, works really well. I got the idea back in the day from Projekteg using the serial cables with the maxx32. Nice write-up though. thanks |
Re: New Writeup for Uberdata - Quick Disconnect Datalogging Cable install
Originally Posted by lkailburn
Originally Posted by Cray91
Originally Posted by lkailburn
where did you get the 'phone' serial to usb cable?
thanks for the writeup 8) I did that set-up on MNCRXSi's ECU, works really well. I got the idea back in the day from Projekteg using the serial cables with the maxx32. Nice write-up though. thanks |
All times are GMT -5. The time now is 05:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands