New Dual Boost Gauge with T.timer, A/F control, Aux trips.
 

New product ( Flexegauge) feature set:

1) Vacuum to 15psi or vacuum to 30psi boost (switchable)
2) Lean/rich a/f display for tuning.
User Preset boost trip point for the following.
3) Boost trip light and aux sender ( can run a relay for water injection, wastegate etc)
4) Lean-boost trip light and chatterproof (hysteresis) aux sender( Can run a relay to activate injectors or wastegate etc.)
5) Smart turbo timer aux, timer countdown from last boost trip to minimise idle cooldown.
6) MAF/MAP interceptor activated by lean boost condition - corrects MAF/MAP progressively to increase fueling. It is an engine safe guard and economical way to run extra boost without an expensive mapped ems.
7) Uses cat5e data grade cabling for sensor accuracy in an electrically noisy environment.
Cool Has no A/D errors or slow sampling, offers instantaneous display and responses.
9) Autodim circuitry.
10) Backlit : blue,red,green,yellow,white options.
11) Sealed remote electrical sensor requires no mounting, just connect to vac/boost tubing. Sensor lights up when powered.
12) Dual Cat5e wiring harness offers connectivity to engine sensors (maf/o2) both in engine bay and under dash.


Gauge is 3.25 inch dia by 1.5" deep. Will bolt onto a regular 2 1/16 or 2 5/8 gauge cup. Has no moving parts, similar to AEM truboost display on steroids.

Do you guys like the feature set?....anything else you'd like to see in such a gauge? While its about 80mm, it replaces quite a few other devices, and is easy to see from a distance. uses full size LEDs for display. The boost LEDs are colour coded by range, green for Vac, then amber and red for hi boost. The boost trip is bright blue and the lean/boost trip is a super bright flashing Blue or Red.


Thx for reading!!

Pic of facplate layout:
http://img693.imageshack.us/img693/2...eplatedemo.png