Need the map for a stock GSR motor
 

This is going in a P28. I need the STOCK maps for the GSR motor. Not sure if it has to be the 94-95 gsr or what, but the motor is obd2...I need this so I can get my new motor running in the car. If someone generous feels like burning it to a chip for me that would be great! I don't have a chip burner.

TIA!

Re: Need the map for a stock GSR motor
 

xenocron bin depository

Re: Need the map for a stock GSR motor
 

Already looked there. I didn't look through every program's bins, but the majority, if not all were turbo maps.

Re: Need the map for a stock GSR motor
 

I have a really good one in there.

Re: Need the map for a stock GSR motor
 

what program is that for?

Re: Need the map for a stock GSR motor
 

whatever program reads bin perhaps?

Re: Need the map for a stock GSR motor
 

All the freeware stuff in ".bin" format will be Crome or UD, 99% likely Crome.

Re: Need the map for a stock GSR motor
 

It's Crome but thats the wrong map. That car had cams and type R pistons. timing probably not so good for a stock engine.

Re: Need the map for a stock GSR motor
 

Got a guy on ht to burn one for me. JD, do I need a knock board in my P28? Someone mentioned that as well. Said Wes V gave it to him...

Re: Need the map for a stock GSR motor
 

If the guy sends you a .bin for a P28 that has knock enabled he needs to be kicked in the dickhole.

Re: Need the map for a stock GSR motor
 

pretty much. If he was that dumb it probably wouldn't have checksum removed either. :S

Re: Need the map for a stock GSR motor
 

None of you kids these days can manually calculate an 8 bit checksum, I sincerely doubt some of your abilities to do thirty seconds of pointy-clicky correctly.

Re: Need the map for a stock GSR motor
 

No way when it comes to setting up a rom I pretty much don't forget anything I have a procedure and I do it the same way everytime. You hit one of my weak spots though by pointing out that I can't edit raw hex. I wish I could it's one of those things that puts you and Dave on a higher level then me. And that hurts my feeling.

Re: Need the map for a stock GSR motor
 

Google the freeware program check8.exe. Run your modified .bin through it (edit in Crome without removing checksum). It will give you a number 0-255 (8 bits), you need to add the difference between it and 0 somewhere in a blank section of the .bin so that when you run check8.exe on the .bin a second time it comes back 0 - which is what the program looks for to make sure the .bin isn't corrupted. Hit me up if you need a pointer along the way.

It's a baby step into dealing with the .bin in hex, which still isn't ASM programming. I ------- hate ASM, all the bitwise ---- gets me bogged down, although I was one of the better ones at it in class (50% because I'm somewhat bright and 50% because I've done enough unpleasant ---- that I know know punking out is what gets the job done - unlike my late teen early 20-something classmates). I'm running myself through C++ right now and there are structural similarities between it and most of the IDEs for programming ASM, but it's a lot easier to do high level stuff so you don't get bogged down by pushing individual bits around and always crossreferrencing against the condition code register. You should *definitely* take a class in ASM so you get a big picture view of how ---- works, but unless you really get off on it you should stick to programming micros in C/C++/C#/VB.

Yah, I typed all this ---- to tell you what you need to do if you want to be more than a cake boy like most tuners/Mase.

Re: Need the map for a stock GSR motor
 

Man I haven't been spending nights out until 4am with some dipshits car figuring ---- out just to be a "Cake BOY" Thanks for the advice on hex I really just didn't know where to start .I'm in this for the long haul brother.

Re: Need the map for a stock GSR motor
 

You know how to get ahold of me if you need direction. Keep at it and there'll be a day the people you look up to call you for advice.

Re: Need the map for a stock GSR motor
 

ummm he already does.. ;)

Re: Need the map for a stock GSR motor
 

Macgyver has only called me one time. And that was just to borrow electrical tape for god knows what ::)

Re: Need the map for a stock GSR motor
 

I texted you twice about it like thursday or friday and didn't hear anything back. Was trying to see if you could burn a chip for me, but I think I'm gonna get my hands on a P72 in the next coulpe of days...

Re: Need the map for a stock GSR motor
 

I'm on Verizon (drops messages) in the mountains (drops messages).

I couldn't help you with it though; I suck at remembering to ship anything (out of sight out of mind), and I got really sick of the basemap/chip drama.

Re: Need the map for a stock GSR motor
 

You still havent sent my turbo have you >:(

Re: Need the map for a stock GSR motor
 

Damn, how did you get worse than hotrex at shipping?

Re: Need the map for a stock GSR motor
 

Worse? I refuse to accept money or make shipping promises (except to guys who owe me -$28) so that makes me > hotrex.

Re: Need the map for a stock GSR motor
 

lol You = G :6