need instructions on how to burn\erase SST 27SF512 with willems.
hello everyone.
search isnt working... anyone have instructions on how to burn\erase SST 27SF512 with willems burner? thanks.... |
Re: need instructions on how to burn\erase SST 27SF512 with willems.
|
Re: need instructions on how to burn\erase SST 27SF512 with willems.
WOOT
|
Re: need instructions on how to burn\erase SST 27SF512 with willems.
Originally Posted by racepak
WOOT
i followed all the instructions, placed the jumpers and dip swich as it shows. it burns the chip like everything is ok but when i place iy in the ecu and put the key on "on" i m getting a solid cel. and when im checking tdc's it shows a solid cel. ??? ps. checksum was removed all times. when i'm trying the same bins on my old at29c256 everything works fine. please help. |
Re: need instructions on how to burn\erase SST 27SF512 with willems.
You need to burn 512's at an offset of x8000; the ECU is designed for 256's so it does not switch power and ground on pin 1 to flip between the upper and lower 256 kbits of memory on the chip.
|
Re: need instructions on how to burn\erase SST 27SF512 with willems.
Also don't forget to erase the chip every time you try to reburn, and also erase before you burn to it for the first time.
|
Re: need instructions on how to burn\erase SST 27SF512 with willems.
yup, you should be able to get em working, i've got the same burner and chips for when im done tuning with the ostrich.
chips and burner work great 8) -Luke |
Re: need instructions on how to burn\erase SST 27SF512 with willems.
Originally Posted by lkailburn
yup, you should be able to get em working, i've got the same burner and chips for when im done tuning with the ostrich.
chips and burner work great 8) -Luke but when im trying to erase them a popup jumps and it says: setting jumper for erase W27EXXX. then i click OK. and the burning bar jumps but after 2 seconds anoter popup jumps thats says: move jumper for erase W27EXXX and setting vvp 12.75v. :'( :S |
Re: need instructions on how to burn\erase SST 27SF512 with willems.
Originally Posted by racepak
thanks guys. it worked.
but when im trying to erase them a popup jumps and it says: setting jumper for erase W27EXXX. then i click OK. and the burning bar jumps but after 2 seconds anoter popup jumps thats says: move jumper for erase W27EXXX and setting vvp 12.75v. :'( :S |
Re: need instructions on how to burn\erase SST 27SF512 with willems.
Originally Posted by slo_crx1
It's just a reminder...when you first start off with the burner you should have the jumper that erases the chip removed. When you click "erase" it pops the message to remind you to put the jumper back on, and then remove it again once it's done erasing.
|
All times are GMT -5. The time now is 12:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands